rodger. Posted August 20, 2012 Report Posted August 20, 2012 I walked into HD depot taoday to get some 0000 steel wool, and I bought a 3.25 HP router. The router was marked down from 315.00 to 42.00. It's a "floor model" freud FT2200 VCE. I have used one just like it many times in a woodshop that I took lessons from years ago. It is a great router, and for 42.00, how could I say no? The only thing missing was the manual, which I got online. So I am removing my DeWalt 2.25 HP out of my RT, and the new Freud will live in the table (no need to remove it). I read an article on how to remove the springs, but I am wondering why one would want to do this. Here is the link: http://www.freud.ca/PDFs/SpringRemoval.pdf What is the benefit of removing the springs? Quote
wdwerker Posted August 20, 2012 Report Posted August 20, 2012 When you table mount a plunge router gravity will lower it and the knob/ crank will raise it, so why fight the springs? I have a different Freud router and it has been pretty good in my little router table for several years Quote
rodger. Posted August 20, 2012 Author Report Posted August 20, 2012 Kind of answering my own post. I found this article on rockler: http://www.rockler.com/blog/index.cfm?mode=entry&entry=7F491159-1372-6771-F619D7B631465D0A Quote
fransikaner Posted August 20, 2012 Report Posted August 20, 2012 "The greatest knowledge is that acquired through self-actualization"................... or looking it up on the internet. Quote
tim0625 Posted August 21, 2012 Report Posted August 21, 2012 Kind of answering my own post. I found this article on rockler: http://www.rockler.c...619D7B631465D0A I am pwoud of yu gwasshopper Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.