Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

RIDGID 10 in. 13-Amp Professional Table Saw

Featured Replies

What do you guys think about this saw?

http://www.homedepot.com/h_d1/N-5yc1v/R-202500206/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=ridgid&storeId=10051#.UG2Us_nuW9E

Eventually, I will be in the market for a new table saw. Being 21, my budget doesn't allow for too high of a price.

I do not intend on using this table saw for large sheet goods. I plan to cut those with another future purchase of the Festool TS 55 ;)

I'm more of a hobby woodworker, but I like to build and sell projects for friends/family.

If you like ridgid saws, you may want to look around on criags list for ts 3650. Great saw, and you can probably get it for a good price used.

  • Author

If you like ridgid saws, you may want to look around on criags list for ts 3650. Great saw, and you can probably get it for a good price used.

I'm not really particular of the brand, to be honest. I have no special interest toward anything in specific. I just saw this saw at a pretty good price and thought it might be worth it.

There is no reason why the 4512 won't give you many years of great service. As with any saw in that general price range, there are both pros and cons but overall the Ridid hybrid is as good as any of the others.

  • Author

There is no reason why the 4512 won't give you many years of great service. As with any saw in that general price range, there are both pros and cons but overall the Ridid hybrid is as good as any of the others.

What are some of the pros and cons I should expect with this level saw?
  • Author

How does this saw compared to the Porter Cable available at Lowes for $599.99?

How does this saw compared to the Porter Cable available at Lowes for $599.99?

IMHO, the R4512 has a better fence, and it has heavier gauge steel on the legs. The PCB270TS also has a plastic elevation gear.

What are some of the pros and cons I should expect with this level saw?

The R4512 has steel wings vs solid cast iron. The fence is decent, but not great. Earlier models had some alignment issues, but I believe they've been fixed. Any saw in this class has some power limitations, and are lighter than cabinet saws, but with good alignment and good blade selection, they'll do just about everything you'll ask.

If you buy one, see if you can find an HD to accept a 20% Harbor Freight coupon....$435 is a pretty sweet deal.

  • Author

IMHO, the R4512 has a better fence, and it has heavier gauge steel on the legs. The PCB270TS also has a plastic elevation gear.

The R4512 has steel wings vs solid cast iron. The fence is decent, but not great. Earlier models had some alignment issues, but I believe they've been fixed. Any saw in this class has some power limitations, and are lighter than cabinet saws, but with good alignment and good blade selection, they'll do just about everything you'll ask.

If you buy one, see if you can find an HD to accept a 20% Harbor Freight coupon....$435 is a pretty sweet deal.

wow. That really would be an awesome deal!
  • Author

How is the quality of Ridgid tools as a whole? I've never owned one before. But they have some pretty decent priced equipment, if I decided to add to my tool collection.

How is the quality of Ridgid tools as a whole? I've never owned one before. But they have some pretty decent priced equipment, if I decided to add to my tool collection.

As with any manufacturer, quality (and suitability) varies by tool and by the needs of the user, and is a matter of opinion, but overall I think they're decent value oriented tools. Some of their tools are used by pros....jobsite saw, cordless drills, miter saws, etc. The R4512 makes a nice homeowner/hobby saw, but wouldn't work too well in a commercial shop that ran it hard 24/7. AFAIK, the R4512 is manufactured by Dayton....it's essentially the same saw as the Cman 21833, the Menard's MasterForce, and Dayton 4KXD1....some "bolt-ons" may be different. It also has remarkably similar guts to the Grizzly G0715P, but the Griz offers a full enclosure, solid cast wings, and a better fence. It's as good as any of the new saws in the < $600 class IMO....none of the new saws in this price range give you the best of everything, but the better ones make wise choices in their compromises. Ridgid offers a lifetime service agreement....read the fine print...it's not a full lifetime warranty, but is sure better than a stick in the eye. I think they might also offer 90 days to return it if you don't like it....check into that too before you buy too.

The end performance of any of them is going to boil down to setup/alignment, and blade choice.

Making sense of TS choices

As always, knotscott is a great source of information on table saws. I can provide a bit of experience, as I have owned a few ridgid tools. I really like the 3650, it has served me well for many years. IMO, it is well worth the cost. Used, it can be had for about 300 cdn.

I also have had dealings with their LLSA. I needed a part for the TS, and they air mailed it internationally next day at no charge. All it took was an email. Make sure you register in the alloted time frame for the agreement.

I also have the planer TP 1300 and am very pleased with it. I have a few other tools as well (drill, ros, etc) and find them of great quality and certainly worth the cost. That being said, there is some discussion on ridgidforum.com about the company "cheaping out" on newer items.

If you hop on over to their website, you can find a lot of owner information on the forum board, including known issues, which models have the best reputation, etc.

  • Author

As always, knotscott is a great source of information on table saws. I can provide a bit of experience, as I have owned a few ridgid tools. I really like the 3650, it has served me well for many years. IMO, it is well worth the cost. Used, it can be had for about 300 cdn.

I also have had dealings with their LLSA. I needed a part for the TS, and they air mailed it internationally next day at no charge. All it took was an email. Make sure you register in the alloted time frame for the agreement.

I also have the planer TP 1300 and am very pleased with it. I have a few other tools as well (drill, ros, etc) and find them of great quality and certainly worth the cost. That being said, there is some discussion on ridgidforum.com about the company "cheaping out" on newer items.

If you hop on over to their website, you can find a lot of owner information on the forum board, including known issues, which models have the best reputation, etc.

absolutely will look into their website. Thank you for the information.

I have this saw. I love it. There are some lemons (trunion issues). Do your homework.You can actually check for the issue in the parking lot and exchange it if need be. I spent about 3 months deciding on a table saw and kept coming back to this one. In my honest opinion unless you double that price there is nothing that can touch it in the "brand new" market. There are some saws that are slightly better in the 800$ range (the grizzly/Rikon/Steel City), but it's not really worth the price jump.You're still getting a hybrid, just with a little more cast iron. You are getting very close to an entry level cabinet saw at that point and are better off eating ramen for a few weeks and pulling the trigger on one of those.

  • Author

Thank you all for the replies. I'm going to talk with my dad and see what he thinks about a new table saw for our shop. Maybe he will meet me half way on the cost, but then again maybe not.

I am still considering the TS 55 because I always have trouble with sheet goods in my basement shop. I have an entertainment center to build that is going to take up almost all of one 4x8 sheet of plywood with few error to spare. The TS 55 would be amazing to have for that. It's just the fact that I have a limited budget so it is one or the other right now.

Most sheet good suppliers will cut large panels into smaller panels for you at little to no cost to you....just like the Scooter store! :D They make the rough cuts, I trim them to final dimensions on my TS. If budget is tight, a TS55 or equivalent system may not be necessary.

I rarely work with large sheet goods. If I worked with them a lot, a track saw would be a good investment. I get by really well with my "home made" track saw. I get the pieces pretty close to final dimensions that are manageable sizes. After that I finish up on the table saw.

A festool is a nice saw, but you can use a regular circular saw and a straight edge. It will take longer to set up, but a good circular saw (with a 0 clearance insert that you make yourself) can produce clean, accurate cuts. Also, it is far less expensive. A very good circular saw can be had for 150 dollars, and a straight edge is just a long, jointed board of whatever you have.

  • Author

A festool is a nice saw, but you can use a regular circular saw and a straight edge. It will take longer to set up, but a good circular saw (with a 0 clearance insert that you make yourself) can produce clean, accurate cuts. Also, it is far less expensive. A very good circular saw can be had for 150 dollars, and a straight edge is just a long, jointed board of whatever you have.

I have a circular saw, however not a real "quality" one. If I put blue painter's tape along a cut line, would this help with tear out in any way?

I have a circular saw, however not a real "quality" one. If I put blue painter's tape along a cut line, would this help with tear out in any way?

As long as the saw is capable of spinning the blade with minimal runout, it should work fine. The blade is critical though.

Painter's tape should help, as would scoring the cut first....

create zero clearance insert for your saw. This will help a great deal. Also, cutting on top of a sheet of rigid foam can be helpful.

  • Author

create zero clearance insert for your saw. This will help a great deal. Also, cutting on top of a sheet of rigid foam can be helpful.

I am really gearing toward getting the table saw over the TS55 at the moment. Thought I should just throw that out there.

I have some scrap pieces of ply I am going to test with the circular saw.

How is the quality of Ridgid tools as a whole? I've never owned one before. But they have some pretty decent priced equipment, if I decided to add to my tool collection.

I'd heard good things about their previous version of their tablesaw and the Rigid 13" planer has been one of those best value tools in many different magazines (and in the eyes of hobbyists) for a good while. Their tool quality does seem to fluctuate between different items, like all makers. But overall they're generally pretty good value for the price.

  • 4 weeks later...

I own this saw. And it is a great saw. I have never had problem with mine. I even convinced my dad to buy one. If you follow marc's video. On how to set up your table saw. This machine will perform to any ones standard. Compared to the lowes poetercable. The ridging has better construction, dust shoot, and support tables. The ridged fence is so easy to get straight. Also if you pull up the jeeps georga homedepot web page you can get it for 495. And if you homedepot gives you any crap. Order it from jeeps store. And homedepot shi from store to store for free. Also if you military or know some one that is. you get 10% off the 495. And you get the saw for 472.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.