Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tablesaw Cabinet from Leftover Materials

Featured Replies

Tired of leaving my push blocks on my lumber rack, and my other accessories on my clamp rack, I solved the problem with a mash-up of all the blade box / table saw / shop cabinets I've seen, on the cheap!

The solid wood is leftover cypress from a garden gate project. The beige 16" undermount slides were fifteen cents a pair in a 100 pack on eBay. Sweet Horton Brasses knobs leftover from a built-in. A "Paolini" style base cabinet from leftover birch plywood. Leftover Cabot polyurethane and Watco natural Danish Oil. A leftover Saturday, and Sunday morning...

post-5634-0-19275400-1349401482_thumb.jp

The blade holders come out to protect the carbide teeth and saw tables.

post-5634-0-04222200-1349401481_thumb.jp

I did buy some 1/4" MDF, a 5/8" dowel, and some swiveling Harbor Freight casters, but I'm happy... It's nice not having stuff I put down interfere with fence movement, so I celebrated with a cold Harpoon IPA!

looks good i hope to have something similar one day for my table saw blades but for the time being i just have all mine ina drawer.

Looks like a great design and good use of leftover materials. I need to take a day off and build a cabinet for under my table saw. Hope you don't mind if I barrow your blade holder design I need space for about 20 of them! Oh I may also barrow you finished project celebration method! Nice job!

  • Author

Thanks, all...

The blade holder design has appeared in several magazines over the years. It works well, but I didn't invent it. Tempered hardboard, the kind that's smooth on both faces, is preferable to MDF, but my local places didn't have any. The top holder is deeper than rest, to make room for a dado set.

The blade holders are quick and easy to batch out with a pattern bit. I drilled the holes for the center post and "front" screws, bolted together a stack of 6 blanks with #8 machine screws and nuts, roughed the curve on the band saw, then routed the curved fronts 6 at a time. I've used the same technique many times to make identical airplane parts.

The blades simply slide into a groove, with the front stopping against the runner panels. To ensure they match, I grooved the runner boards double width, then ripped it in half and screwed it to the right side and center divider. If I want to rearrange some day, I can replace the runner boards.

That's sweet Barry! But I'm not buying you built it in a day and a quarter. :D

  • Author

No, really... That's all the time it took. It's just a screwed together box with a back that slides into a groove, and a center divider, five simple boxes, and some plates. I'll bet lots of folks here could build it just as fast.

The drawer boxes, blade floors, and all the solid wood parts were batched with stop blocks and a crosscut sled. I cut the blade holder grooves, drawer bottom grooves, and cabinet back grooves, with a single dado setup. The undermount drawer slides were installed with an MDF stop block that got cut shorter as I installed each pair of slides and moved down the inside walls to the next pair. The drawer boxes are simply glued and brad nailed together. The blade pegs were chamfered on a disc sander with an angled fence clamped on, then cut to length with a band saw sled and stop block. I'd sand a chamfer, cut, sand, cut, repeat as necessary. All the top and drawer chamfers were done at once.

The top is two coats of gloss poly, rubbed down with a 2000 grit Abranet pad, the rest is Watco oil.

I'm just messin' Barry, I believe ya. I have a skewed perception of how long projects should take anyway, because I'm one of those slow woodworkers.

I can be slow, too... I started a 1765 Connecticut Tea Table reproduction in June. It hasn't changed since the fireworks were flying... ;^)

Which makes me think about how many projects we have going on....see a new thread under general discussion :)

That's awesome, Barry! I need to make one of those. It's perfect!

I made something very similar (but not quite as nice looking). Since I have a ton of table saw blades, I doubled them up - one on the top and one on the bottom. I cut the head off the end of a bolt and put a threaded insert into the shelf. I screwed the bolt through the threaded insert. each blade is held in with a wing nut and a rubber washer. Since I ditched the router table for a TS insert, I have to make a bigger one now.

  • 4 weeks later...

. A "Paolini" style base cabinet from leftover birch plywood.

I've been working on, and refining, the "Paolini Style" but I was always hoping for it to apply to some sort of Arts & Crafts furniture, not plywood boxes ;)

(Hope that came out as jokingly as it was meant)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.