Recommended Posts

Posted

Hello everyone !

as my 1st project i want to submit to criticism, this is a scrapwood table i made in school, in between 2 projects.

i always hated when i passed a trash bin and saw small, but beautiful pieces of hardwood in there. Wood is a living material and i feel really guilty of wasting it.

for like 6 months, every time i saw a piece, i took it out of the trash, and piled it up under my bench at school.

the teachers often said to me "clear that, you'll never use that" but i had something in mind.

so, when i had some free time, i decided to go for it. i took all the small pieces and jointed and planed them and cut them straight at the ends.

i planed to 3 thickness. 15, 30 and 45mm so i could inter change pieces to make different patterns, but so they would always end up fitting.

that was a LOT of work. row by row, i glued the pieces to make the top and the legs.

post-7625-0-18162000-1350832126_thumb.jp

post-7625-0-47447600-1350832484_thumb.jp

then, i opted for 'through tennons?" sorry im french canadian! That step i HATED. i did them by hand and it was a pain! 2 inch hardwood mortize x4. even though i pre-drilled the contours, it still was very long. if i did it again, ill try the router with some jig for better/quicker results.

post-7625-0-05572100-1350832295_thumb.jp

i made a notch to the tennons on the bandsaw so i could put a piece of wood later on to fix the tenons in place.

post-7625-0-91936200-1350832469_thumb.jp

sanded everything and sprayed 3-4 coats of Pour-N-Wipe "normally" wipe-on finish and the result was very pleasing.

so if you have a hard time throwing scrap wood away, here is a project you could do with them !

the look is very modern and i think it fits well. Any tips, comments, advices for me ? i'm still leanring every day !

post-7625-0-44795300-1350832607_thumb.jp post-7625-0-53502000-1350832942_thumb.jp

  • Like 1
Posted

Gluing up scraps is indeed a fantastically labor-intensive process. So much the better then, that you were able to produce such a dynamic and energetic piece. Angling the legs gives it even more tension, making for a very bold work, bordering even on loud.

Fit and finish look fine, so any critiques are going to run into the realm of personal taste. Even in the wild and rectilinear palette that you've created, I find myself wishing for something organic. Is there any way it could have had some curves? Perhaps a broad sweep at the ends and maybe coopering the legs (they are glue-ups, after all) to get them slightly convex.

med_gallery_211_737_66195.jpg

But, again, this is all just matters of taste and what other directions you might have gone. Beautiful job all around.

Posted

that would have been nice indeed. Everything i do so far is "for the 1st time" as i am still learning in school. I just learned this week how to put a jig in the planer to plane planks with an angle on them (could also be done on the jointer, but planer gives more reproducible results)

i could have done that for the legs. but the glue up would have been a little harder i suppose. i'll think about ways i could have done it. maybe there is an easy way i'm not thinking of ! but gluing pieces with an angle would make them slide. bah i'll think about it ! that'S how i learn ! Or would you simply had glued thicker legs, then make the cove in them ? hmm probably not !

anyway, this forum is amazing (because of the amazing ppls!). i've been browsing it all day long.

Guillaume

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 62 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined