Pwalter5110 Posted October 27, 2012 Report Posted October 27, 2012 I bought a used Delta drum sander off craigslist, and my question is...How to use this thing? I made a few cutting boards, If the conveyer belt is to slow it burns. If I turn the speed up to high, it stalls out. There doesn't seem to be a happy medium. The sand paper looks new. Also, I am only taking off MAYBE a 1/128th of an in. By moving the adjustment wheel MAYBE an 1/8th turn. But any advice of the speed settings? Or any tricks I should know? Quote
Hybrid-woodworker Posted October 28, 2012 Report Posted October 28, 2012 HiPat, not sure what model you have but I would make sure the table is adjusted correctly, take light cuts and the feed rate medium. What kind of of wood are you sanding. BRuce Quote
Vic Posted October 28, 2012 Report Posted October 28, 2012 Also, the finer the grit the lighter passes needed and slower the feed rate. I have the 18-36 an wish I'd got a Performax. Quote
Hybrid-woodworker Posted October 28, 2012 Report Posted October 28, 2012 I have to agree. Right now though, I would settle for one that runs. I tried to use mine yesterday and the drive motor would not work. Today I will work on fixing that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.