Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

after market table saw fences

Featured Replies

Im looking to upgrade my 4512 with a better fence. The T2 is the most affordable. The vega 40 gives me what I really need 40 inch capacity. Ive found a 36-B30 on cl new in the box with leg extensions and formica top (200.00) plus 42 shipping. T2 and 36B30 almost identical. The only bad thing I hear about the vega is the round bar rail . I want to go for the 36-B30 but the vega offer more for the same price any thoughts?

Sorry, I have a Biesemeyer. I love it, if that helps.

I have a Vega and a Biesmeyer both are nice. A few weeks ago I called Vega with a parts question, an hour later the owner called me back and explained the best way to fix my problem. My Vega fence has been in commercial service for 20 years, round bar is not an issue. I would buy a Vega tomorrow if I needed a fence!

  • Author

Thanks for the advise wdwrker. 1 more question Im now looking at the vega 50 for 10 dollars more.

Can I shift the rail to the left of the blade and still calibrate the ruler? This way I could add 10 inches to the left and still have 40 to the right or is the ruler fixed?

  • Author

I think the B30 has been crossed off the list(not really)the seller does not have paypal I dont feel comfortable sending a check or money order. The vega looks to use L brackets so mounting a bracket to an outer wing it could droop. The angle iron of the T2 mounted to the main table looks more sturder.

post-5469-0-03132800-1352210066_thumb.jp

post-5469-0-50907500-1352210496_thumb.jp

We put legs on the outside end to support the fence rails and the outer wing hangs between the rails. I have stood on it off and on for 20 years to take pictures. The rails go past the blade about 10" and give you the full rip size listed. You can shift it around left or right however you need to. The tape is stuck on after you have everything assembled. The cursor is adjustable so you can set it perfect to your blade. You can shift it to compensate for thin kerf or full kerf blades.

We added a Wixley digital kit to the Vega fence recently, easy bolt on.

I have the 50" pro vega fence. You can eve cut the rails off if they are too long, just use a hacksaw or metal blade in a sawzall.

I have the T2 for my table saw, and really like it. I do believe they make 50" rails for it, if that is a better fit for you.

Are Biesemeyer fences dead flat? My TS came with a Biese "style" fence, but the UHMWP has slight undulations where it's bolted to the steel. Whether or not this makes a difference in the accuracy of my cuts I have yet to conclusively decide since I haven't noticed any problems. But it drives me absolutely nuts when I'm ripping a board and I can see a gap between it and the fence.

Trying to figure a cheap way to fix the UHMWP (maybe shims?) or any alternative to replacing the entire fence. Idears?

I have been using a Delta Unifence for about 7 years now. I flippin love it.

The unique shape sometimes causes issues, but more often it creates oportunities. I love the speed at which it can be adjusted, reset, repositioned, etc...

If you rip 4x8 sheets of different thickness plywood down to cabinet parts as often as I do (on your table saw), I don't think there is another option. That's one man's opinion.

Are Biesemeyer fences dead flat? My TS came with a Biese "style" fence, but the UHMWP has slight undulations where it's bolted to the steel. Whether or not this makes a difference in the accuracy of my cuts I have yet to conclusively decide since I haven't noticed any problems. But it drives me absolutely nuts when I'm ripping a board and I can see a gap between it and the fence.

Trying to figure a cheap way to fix the UHMWP (maybe shims?) or any alternative to replacing the entire fence. Idears?

Clamp an MDF fence face over the existing fence and rip more MDF with and without the MDF face. I'll bet they're identical. If they are, you can ignore the waves.

Unifences are really cool! I really like the way you can slide it back to use as a stop, without a standoff.

I almost had one a few years ago, but lost the auction. I wish Delta would produce it again.

Are Biesemeyer fences dead flat? My TS came with a Biese "style" fence, but the UHMWP has slight undulations where it's bolted to the steel. Whether or not this makes a difference in the accuracy of my cuts I have yet to conclusively decide since I haven't noticed any problems. But it drives me absolutely nuts when I'm ripping a board and I can see a gap between it and the fence.

Trying to figure a cheap way to fix the UHMWP (maybe shims?) or any alternative to replacing the entire fence. Idears?

Are you talking about a true Biesemeyer with the laminated faces over birch ply or one of the Biese clones like a Shop Fox Classic, HTC, Jet Xacta II, etc., with UHMW or HDPE plastic faces? All aim to be truly flat, but the plastic faces have more tendency to have some minor deviations, and even some of the Biese fences might not be perfect. There's a difference between a defective fence, and one with some minor random deviations from flat. As long as the deviations don't effect a cut, it's not something I'd worry about. If it's defective, return it....if bought used, there are some relatively easy fixes for minor issues.

Are you talking about a true Biesemeyer with the laminated faces over birch ply or one of the Biese clones like a Shop Fox Classic, HTC, Jet Xacta II, etc., with UHMW or HDPE plastic faces? All aim to be truly flat, but the plastic faces have more tendency to have some minor deviations, and even some of the Biese fences might not be perfect. There's a difference between a defective fence, and one with some minor random deviations from flat. As long as the deviations don't effect a cut, it's not something I'd worry about. If it's defective, return it....if bought used, there are some relatively easy fixes for minor issues.

Yeah I'm talking about the Biese clone that came with my Griz 0690. It has slight dips where the plastic is bolted to the steel. Otherwise I like it. I thought about trying to shim out the low spots but haven't gone at it yet.

Yeah I'm talking about the Biese clone that came with my Griz 0690. It has slight dips where the plastic is bolted to the steel. Otherwise I like it. I thought about trying to shim out the low spots but haven't gone at it yet.

Shimming is an easy solution. I've even heard of people putting the UHMW faces on a jointer to flatten them. Or you can always replace them with something else altogether.

I have an Incra system. My hinney tightened over the price but having used it for a year, it has met and far exceeded my hopes as a TS fence. Watch Mark Mueller's videos on YouTube - it all works exactly as he demos it. When I bought a Grizzly 5hp saw, I never installed the Shop Fox fence. It's that good.

  • Author

Ive been reading your not supposed to the have the fence perfectly parallel here's the intructions. Im not installing a shop fox but I was wondering how people are using this technique.

post-5469-0-69449800-1352506835_thumb.jp

Back end of the fence should only be about the thickness of a sheet of paper wider, not 1/64 ! Just as tiny an amount as possible. It keeps the blade from binding and burning.

We use a zero clearance throat plate with Micro Jig splitters which help hold the stock over to the fence and they really reduce saw marks when ripping.

Which fence did you decide on?

  • Author

I ordered the vega pro 50. Im going to make tops to fill the gap between the rails. I checked at lowes and a sheet of formica(granite color) is 70.00

so I checked my local cabinet shops today and scored many different pcs of formica and have narrowed down to the pcs below. The narrow piece I prefer is not big enough to be used without a seam and will scratch easily. The bigger sheet is a flat finish and has some faint shades of orange that match my saw(sensible choice) in all I obtained five different pcs for 20.00. The fence will be in next week should be a fun project.

post-5469-0-10766000-1352528976_thumb.jp

post-5469-0-55274800-1352528992_thumb.jp

Ive been reading your not supposed to the have the fence perfectly parallel here's the intructions. Im not installing a shop fox but I was wondering how people are using this technique.[attachment=6979:Shop Fox. Fence-14-10 Nov 2012 00-16-14 GMT.jpg

I'm with wdwerker. Because my saw is left tilt, and I never rip with the fence to the left of the blade, I adjust my fence with a very slight toe out (lead)....maybe 0.003". 1/64" is more than I've ever heard suggested.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.