Dave F Posted November 15, 2012 Report Posted November 15, 2012 I'm pretty seroiusly looking at the Ridgid R4512 tablesaw as my next major purchase. I was giving it the once over the Home Depot that other day and noted that it may be pre-readied for a modification that i've been considering. If you look at my attached photo you see a series of pre drilled holes in the extention table and the end tie on the fence rails (red circles). I think it would be fairly easy to drop in a platform for a router table in that space. I'd want to flush it up so that the fence could do double duty with the saw and router. I'd incorporate a T track/ miter track as well. I'd like to drop in the Woodpecker or Kreg router lift system as well. If any of you have the R4512 have you considered or tried this? What issues or complications have you come up against? I'd love to hear you expereinces.. Dave. Quote
pghmyn Posted November 15, 2012 Report Posted November 15, 2012 I have not seen it done specifically with that model, but if there are enough of those pre fabricated holes to support the extension weight, I don't see why you wouldn't be able to do what you explained. Seems like a great idea, in my opinion. Quote
splinterking Posted November 15, 2012 Report Posted November 15, 2012 I have the 4512 and the manual does say you can put a router table insert in the end. I think your plan would work. I will tell you though that my 4512 has been really problematic and I think I'm taking it back to HD this weekend. I may just be unlucky, because a lot of people like it, but a lot of people get problem units too. There customer service at Ridgid is top notch though. Quote
knotscott Posted November 15, 2012 Report Posted November 15, 2012 It should be possible on just about any full size stationary saw. Regardless of which you choose, some support under the router table is prudent to prevent tipping. Having the router table built into the saw isn't quite as slick as a separate RT, but as space saving ideas go, this is a good one IMO. My shop is small and it's been a necessity on my last 3 saws. You could always Google or check the Ridgid forum for examples specific to the R4512....FWIW, the Cman 21833 is pretty much the same saw, so examples of that saw should help too. Quote
joelav Posted November 16, 2012 Report Posted November 16, 2012 Dave, you mean like this? I love my R4512. The manual actually has instructions and dimensions to fill that gap with an extension. Just cut a hole in the extension and drop a router plate in Quote
Dave F Posted November 16, 2012 Author Report Posted November 16, 2012 That's exactly what I'm talking about. I agree with KnotScot that a dedicated router table is the ideal, but as mentioned, I'm looking to save some space as well. That's very cool Joe. Thanks for posting the pic. Quote
joelav Posted November 16, 2012 Report Posted November 16, 2012 I made a new one since then, I set the plate WAAY further back so I have room for a miter slot and i used phenolic coated plywood for the top. The R4512 even comes with the washers and screws needed to mount the table. I moved from a dedicated table to this set up. My only regret is dust collection is not as good. It's a fair trade off for the amount of floor space I got back though. 1 Quote
Indigogyre Posted November 19, 2012 Report Posted November 19, 2012 Dave, I own a r4512 and the manual has a design showing how to build extension tables for the saw. Download the manual and have a look at it. Dean Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.