Recommended Posts

Posted

I haven't been able to do much woodworking lately. My health and mobility has kept me from going down to the basement when my shop is. I've used the time thinking about my workbench.

Our new house should be ready be ready just before Christmas so if I'm physically able I should have a bit of garage to use for woodworking (God willin' and the body don't fail).

I'm about 80% sure that I want a Nicholson style. I have the benchcrafted plans for the split top Roubo and that accounts for the other 20%. After watching the series that Bob Rozaieski's bench building podcasts I think that I like the form.

I also am leaning heavily to having a crochet instead of a face vise. I'm also leaning towards a wagon vise on the tail using benchcrafted hardware.

It seems that a row of square dog holes in the front coupled with round ones in the back for holdfasts would be a very good choice for workholding. However, I'm wondering if having all 3/4" round holes would be more versatile (especially with all the need little do-dads that Rob offers).

So what'dya think? On the right track?

Posted

The choice of bench is very personal so if the Roubo works for you great. As far as the bench dogs are concerned, I had square dogs in my old bench but switched to round holes in my current bench. At any location I can use a dog or a hold down, much more convient. I use the Jorgensen T type dogs or 3/4" hardwood dowels. I don't miss the square dogs at all, not to mention squaring all those holes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.