Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Scaling the bench's length

Featured Replies

Working on my Roubo and while I still have to flatten my top, I'm thinking ahead to the planning base.

I was able to get a top slab that is 9'9" long (117") which is 20" longer than the plans. I'm asking for some help in determining where to place the legs on this longer bench.

Two questions - Should I center/balance the legs? and What should the over hang be on each end?

The guild plans call for the legs to be offset with respect to the overhang on each side, but I would guess that has to do with the room needed for the Benchcrafted tail vise. I'm not using that hardware, so I don't have that specific restriction. I have a Record quick release vise that I'll nee to accomodate, but even that's not as big of a concern - since I went with a single slab for the top, I won't have a top stretcher and thus would only need to set the end vise back far enough to clear the depth of the front right leg.

Keeping the same width of the legs (5 3/8"), I would have 106 1/4" of "not the legs" length to the bench

Using the same proportions as the plans (which is about 20%/55%/25%) make the bench 20.5" - leg - 58" - leg - 27.75"

The larger of the plan's overhangs would be 20" - leg - 66.25" - leg - 20"

The shorter of the plan's overhangs would be 15" - leg - 76.25" - leg - 15"

I only need 12" for the end vise's clearance, so any of those plans would "fit" my hardware.

Thoughts?

one end is determined by the tail vice -- so that one's pretty much fixed. I'd just add the space in the middle and position the leg vice the same distance as in the BC build on the other side.

Hey Steve, good questions. First, the mismatched overhangs in the Guild plans were based on the required overhang for the Benchcrafted Tail Vise. It's funny how these designs morph over time, but my belief is that Jameel and the guys started with the dimensions from Christopher Schwarz's first workbench book then simply moved the legs on the right side inward to make room for the vise.

Anyway, most other benches have the top centered on the legs. For what it's worth, here are the overhangs from some of the "famous" benches from recent years. Nothing special about who is (or isn't) on this list, these were just the ones available to me via the SketchUp warehouse.

Bob Lang's 21st Century Workbench - 90" overall length, with 12 1/2" overhangs on both ends. I think Bob also uses a record vise in the tail position.

Christopher Schwarz's "Original 2005" Roubo - 96" overall length with 15" overhangs. This is the one published in his first workbench book.

Megan Fitzpatrick's "Gluebo" with LVL top - 96" overall with 18" overhangs.

Chistopher Schwarz's Old School Roubo - 72" overall, 12" overhangs. This is the one made from a solid slabs of cherry, mostly by hand.

My personal vote is to center the legs. For the overhang, I'd probably go toward the large end of the spectrum since your bench will be pretty long. About 18", which should keep things in balance and proportioned well.

Oh, and where can we see pictures??

  • Author

Hey Steve, good questions. First, the mismatched overhangs in the Guild plans were based on the required overhang for the Benchcrafted Tail Vise. It's funny how these designs morph over time, but my belief is that Jameel and the guys started with the dimensions from Christopher Schwarz's first workbench book then simply moved the legs on the right side inward to make room for the vise.

Anyway, most other benches have the top centered on the legs. For what it's worth, here are the overhangs from some of the "famous" benches from recent years. Nothing special about who is (or isn't) on this list, these were just the ones available to me via the SketchUp warehouse.

Bob Lang's 21st Century Workbench - 90" overall length, with 12 1/2" overhangs on both ends. I think Bob also uses a record vise in the tail position.

Christopher Schwarz's "Original 2005" Roubo - 96" overall length with 15" overhangs. This is the one published in his first workbench book.

Megan Fitzpatrick's "Gluebo" with LVL top - 96" overall with 18" overhangs.

Chistopher Schwarz's Old School Roubo - 72" overall, 12" overhangs. This is the one made from a solid slabs of cherry, mostly by hand.

My personal vote is to center the legs. For the overhang, I'd probably go toward the large end of the spectrum since your bench will be pretty long. About 18", which should keep things in balance and proportioned well.

Oh, and where can we see pictures??

Thanks for the thoughts. Good to hear my gut feeling about centering the legs confirmed by another.

I'll probably mock up some legs out of cardboard, set them at 18" in, then slide them around to get a better feel.

As for pics, I only have the one blog post up so far, but I'm due for another (considering I finished flattening the top last night).

  • Author

I think I've settled on 21" from the ends. I'll get to that next bench blog post shortly... (ha!)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.