dcustoms Posted December 9, 2012 Report Posted December 9, 2012 Hello All! I am a pro woodworker from the south side of Chicago. I finally pulled the trigger on a saw stop this weekend which retires my X5 unisaw to a dedicated dado saw. I purchased a 5hp industrial Sawstop with the 52inch fence. I have got to say this thing is great! Way nicer than my unisaw. I also purchased a Mirka Ceros sander which is also awesome! They have quite a steep price tag but make sanding a joy compared to other sanders I have used. I also scored a used virutex laminate trimmer which as simple as it is will make my life a whole lot easier. So attached is a pic of the saw all put together. Monday morning it will get a new out-feed table and we will be up and running. Thanks, Quote
CT Proctor Posted December 9, 2012 Report Posted December 9, 2012 Congrats Dustin, I think we need to do the hot dog test on it. Quote
pghmyn Posted December 9, 2012 Report Posted December 9, 2012 I would be lying if I saw I wasn't jealous Quote
Jim Heinbuch Posted December 9, 2012 Report Posted December 9, 2012 Congratulations. I have and love the PCS 3 hp and love it. Ihave put my router on the 36" extension in my saw and really like it a lot. My only complaint is that I haven't made enough sawdust with it yet but right now I am in the middle of a move from western to eastern Canada. Quote
UglySteve Posted December 9, 2012 Report Posted December 9, 2012 I have that exact saw. She's my baby. You will love it. Congratulations. Quote
ChetlovesMer Posted December 10, 2012 Report Posted December 10, 2012 I have that same saw as well. I've had it about 7 years and if something happened to it, I'd replace it tomorrow. I'm working on connecting my 6" PVC to the saw and I was wondering did you run 6" PVC all the way to the 4" port? or Did you neck it down to 4 inches? Anychance you'd take a picture of it from the other side so I can see your connection? BTW - Congrats on the saw. You're gunna love it. Quote
dcustoms Posted December 10, 2012 Author Report Posted December 10, 2012 I will get you a pic soon I just took a 4 to 6 HVAC adapter and adapted it at the saw. keeping it 6inch as long as possible. Quote
dcustoms Posted December 10, 2012 Author Report Posted December 10, 2012 I have that same saw as well. I've had it about 7 years and if something happened to it, I'd replace it tomorrow. I'm working on connecting my 6" PVC to the saw and I was wondering did you run 6" PVC all the way to the 4" port? or Did you neck it down to 4 inches? Anychance you'd take a picture of it from the other side so I can see your connection? BTW - Congrats on the saw. You're gunna love it. Here you go! hope this helps. Quote
ChetlovesMer Posted December 10, 2012 Report Posted December 10, 2012 Thanks! By the way, do you use the other blast gate for your blade guard collection? Quote
dcustoms Posted December 10, 2012 Author Report Posted December 10, 2012 No that is still there from my old shop where I had a shaper next to the table saw. I currently do not use that port. I have to order the over arm dust collector arm for the blade guard then I will either attach it to a port I have on the main branch line or just wye off of the main pickup on the saw. Quote
dcustoms Posted December 11, 2012 Author Report Posted December 11, 2012 I just completed a new out feed table for the new Sawstop. I used the same black laminate that was used on the extension table supplied by Sawstop. Hope you guys like it. Thanks, Dustin Quote
CT Proctor Posted December 11, 2012 Report Posted December 11, 2012 You'll never see it that clean again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.