Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing with CA how's it done?

Featured Replies

So I have a few little projects that are small. They are pendants and I was thinking that CA would be the best finish for them given their size. Question is how does one do it? Do you just squirt on let dry and buff? How many coats? 3-4 like poly? Thanks in advance!

-chuck

Charles, I've seen Capt. Eddie use it on a couple of his youtube videos, but I've never used it myself. Check out Eddie Castelin on youtube (sp?)

CA is used pretty commonly for finishing pens. If you search CA finish on youtube you will find dozens of examples. Most are applied using a lathe, and wiping on with paper towel. You will need extremely high grit sanding or a buffing wheel to get a good smooth look from CA. I use micromesh sanding system which is 1500 grit - 12,000 grit foam pads. The buffing wheel can get you a better finish, but there is a higher risk of also over heating and ruining the finish.

I assume your talking about on turnings? Here's what I do.

I use thin CA glue and a paper towel. Fold the paper towel into a pad and wet it with the CA glue. With the lathe turning at medium slow speed, wipe the pad across the workpiece. Don't go back and forth. One light pass in one direction. You may have to add more CA glue for subsequent coats.

Don't wrap the paper towel around your fingers because you will glue the paper towel to the workpiece (wrapped around) if you do it wrong.

I advise you to practice on some scrap wood first. A simple cylinder turned and sanded like your workpiece will do. It's not a difficult procedure, but there is a learning curve.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.