williamchall Posted December 28, 2012 Report Posted December 28, 2012 Yet another, what's the best _____ question. I have a new Jet Proshop on order and the old Grizzly left the building today. I've been using Freud 40t combo blades for years and have gotten good results from them. I now want to step it up a notch and would like some opinions on other blades. Yes, I know the Forrest Woodworker II is the bomb-diggity, but what else do people like? I don't know if I can justify $110+ and I know you can get great results for less money. The Infinity blades look decent and I know Mark has mentioned Tenryu in the past. CMT? Others? Can anyone point me to a recent blade comparison? Thanks! Quote
knotscott Posted December 28, 2012 Report Posted December 28, 2012 I've tried a lot of blades, and none have impressed me more than Infinity. The Super General is the cleanest cutting of the 40T general purpose blades I've tried, including the WWII, Tenryu, Ridge Carbide, Freud, CMT, DeWalt, Leitz, Amana. The Combomax is the best of the 50T ATB/R style combination blades I've tried. The Dadonator is the best of the 5 dado sets I've tried. Their 010-060 Hi-ATB 60T, 010-124 24T ripper, and their new 40T Laser TK blade are all terrific too. I wouldn't hesitate to give any of their blades or their router bits a recommendation. You might consider stepping up to task specific blades if you're looking for improved performance. Tips for picking saw blades Quote
TRBaker Posted December 28, 2012 Report Posted December 28, 2012 For fine finish cuts and on plywood or laminate, I use a standard kerf, 80T triple chip . Not good for heavy ripping of thick lumber but great for most other stuff. It was designed for cutting metal and later discovered that it will give you a chip free cut on plastic laminates and plexi. Quote
dwacker Posted December 28, 2012 Report Posted December 28, 2012 If you can find a local Royce Ayr dealer they are a true production class blade that will outlast any blade sold in the hobby market. They are price just a hair higher than hobby market blades and well worth the money. Don Quote
adambaum Posted December 28, 2012 Report Posted December 28, 2012 I have both Freud and Forrest. Can't say I notice the difference between them. Why? My Forrest is a combination blade while my Freuds are cut specific. The Forrest performs excellent for a combo blade, but when I want the best cut possible, I switch to specific crosscut, rip, laminate, etc blades. I think if you stick with the major brands, you'll find that all cut really well and it comes down to nitpicking. Adam Quote
williamchall Posted December 28, 2012 Author Report Posted December 28, 2012 I knew I could count on you all. One of these responses led me to a recent review if anyone happens along to this thread and is interested. http://www.woodmagazine.com/wood/pdf/WOOD-Saw-Blades-II-The-Retest.pdf Quote
TRBaker Posted December 28, 2012 Report Posted December 28, 2012 Thanks, Bill. Excellent article. Quote
estesbubba Posted December 30, 2012 Report Posted December 30, 2012 I have the full kerf Freud P410 and it's the cleanest cutting blade I've used. For your saw a thin kerf might be better and under $68 right now http://www.amazon.com/Freud-P410T-10-Inch-40-Teeth-30-Degree/dp/B0036CANUQ/ref=sr_1_2?ie=UTF8&qid=1356841226&sr=8-2&keywords=Freud+p410 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.