rodger. Posted January 5, 2013 Report Posted January 5, 2013 What is a reasonable price to pay to have a ten inch blade sharpened? Quote
Lumbermeister Posted January 5, 2013 Report Posted January 5, 2013 Depends on the number of teeth. I just had the 24 tooth Freud thin Kerf ripper sharpened for $10.00 via my local Woodcraft store (they outsource the job to a local service). Quote
rodger. Posted January 5, 2013 Author Report Posted January 5, 2013 Depends on the number of teeth. I just had the 24 tooth Freud thin Kerf ripper sharpened for $10.00 via my local Woodcraft store (they outsource the job to a local service). Good point. I think it's a 40 tooth combo blade. Quote
CessnaPilotBarry Posted January 5, 2013 Report Posted January 5, 2013 Here's an example: http://www.forrestblades.com/sharpprice.htm Since Forrest sharpens anything that can be UPS shipped to them, you can use them as a worst case scenario. If you can find a good local shop, that's ideal, especially if you want something not on the menu. My buddy owns a sharpening shop. He doesn't charge me, but he likes airplane rides... However, he's repurposed an old 50T combo (that Forrest told me not to send back) into a 10 degree dovetail blade, and reground my older, extra dado set into a box joint set. Local contacts rule... Quote
estesbubba Posted January 5, 2013 Report Posted January 5, 2013 My buddy owns a sharpening shop. He doesn't charge me, but he likes airplane rides... However, he's repurposed an old 50T combo (that Forrest told me not to send back) into a 10 degree dovetail blade, and reground my older, extra dado set into a box joint set. Local contacts rule... Please let my know what was done to convert dado set to box joint set... Quote
CessnaPilotBarry Posted January 5, 2013 Report Posted January 5, 2013 Please let my know what was done to convert dado set to box joint set... He simply reground the outer plates, removing "batwings" that cut plywood cleanly, making a flat bottomed cut. He also adjusted the tooth width so that both outside plates get me exactly 1/4". I add spacers for more than 1/4". Quote
knotscott Posted January 6, 2013 Report Posted January 6, 2013 What is a reasonable price to pay to have a ten inch blade sharpened? I'd be far more concerned with the quality of the job than the price. Even the most expensive sharpeners should be cheaper than the cost of a new high quality blade (unless you run into an insane closeout price). Poor quality blades aren't worth the bother to resharpen or buy in the first place IMO. Local is great if you've got a good one nearby. Otherwise, places like Dynamic saw, Scott Whiting, Ridge Carbide, and Forrest get high marks from most users. Quote
rodger. Posted January 6, 2013 Author Report Posted January 6, 2013 I'd be far more concerned with the quality of the job than the price. Even the most expensive sharpeners should be cheaper than the cost of a new high quality blade (unless you run into an insane closeout price). Poor quality blades aren't worth the bother to resharpen or buy in the first place IMO. Local is great if you've got a good one nearby. Otherwise, places like Dynamic saw, Scott Whiting, Ridge Carbide, and Forrest get high marks from most users. I was going to bring it to my local lumber yard. They outsource to another company. Quote
CessnaPilotBarry Posted January 6, 2013 Report Posted January 6, 2013 I was going to bring it to my local lumber yard. They outsource to another company. In my area, my buddy is that outsourced company for a lot of places. He has a competitor that isn't so hot. Before I reconnected with him, I was disappointed by his competitor, so I was shipping my sharpening to Forrest or Ballew tool. You could always give them a shot with one blade, before shipping stuff away. You could also call some local cabinet shops and ask who does their sharpening. If they all ship far away, that might say something about the locals... 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.