Jfitz Posted January 14, 2013 Report Posted January 14, 2013 I just bought some replacement knives from Holbren for my Ridgid Jointer. The knives are supposed to be 6 1/8" (6 8/64"), and the old knives were exactly that. However, the new knives came in just a touch longer than that. If I mount them so the ends are flush with the rabbeting ledge, the other end rubs up against the housing at the other end near the pulley. I have never used the rabbeting ledge. My options are to return them or mount them all even but proud of the ledge by ~ 1/16". Thoughts? Quote
Trip Posted January 14, 2013 Report Posted January 14, 2013 No experience with rabbiting ledges -- Many Euro jointers don't have them -- deemed dangerous in combo with the Euro-style safety guard... So I can't comment on the tool... others with experience on the Rigid may offer more on-point advice... But, in general, if you are uncomfortable with a tool that can remove flesh as fast as wood, then you should fix the problem.... get some knives you are comfortable with... Quote
DaBear Posted January 14, 2013 Report Posted January 14, 2013 If it's just a 'smidge' long, you can always grind a little off the end (careful not to overheat..) Quote
dwacker Posted January 14, 2013 Report Posted January 14, 2013 Dont know what knives you bought. Never grind or modify the tool side of a laminated knives. Don Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.