cusas6 Posted January 24, 2013 Report Posted January 24, 2013 Hi All, I was wondering through my super crowded shop (aka garage) the other day trying to figure out how it got so crowded. I know my workbench is too big. Its on a short list to get reworked to save space. I realized I can't do much about the size of my tablesaw. My planer, jointer and drill press are all mobile. The last big thing is my Bosch 10" SCMS on the zero gravity cart with the Fastcap ChopShop hood. I love that saw, I got a great deal on it. It has been used a ton. But I got to thinking. Most of what I do is cross cuts. Could I get away with just a MFT and my Festool TS55? That would save space and provide a nice flat surface for assembly and what not. I love the idea of the MFT and will probably get one someday. But was trying to figure out if I could get rid of my SCMS. The only thing that makes me think not is trying to do things like crown molding and baseboard. Has anyone done that on an MFT? I'm interested in hearing everyone's opinion. Thanks, Scott Quote
ChetlovesMer Posted January 24, 2013 Report Posted January 24, 2013 IMO keep the saw. Get creative on your tool storage. Maybe flip-top-table with the SCM on one side and the planer on the other? 2 tools in the space of 1. There are tons of space saving ideas out there. If you like the saw and it sounds like you do, keep it. 1 Quote
Eric. Posted January 24, 2013 Report Posted January 24, 2013 I agree with Chet. Keep it, and reorganize the shop. There's always more space if you use your melon. Play Tetris for a while to warm up. Quote
dwacker Posted January 24, 2013 Report Posted January 24, 2013 Im in the same boat but just ordered my first real miter saw. Im thinking about making a stand to use the shaper as an infeed table of sorts. Don Quote
Trip Posted January 24, 2013 Report Posted January 24, 2013 I find an SCMS just too useful... Not just furniture, but moldings, trim, and DIY (my wife is a daemon with the SCMS and a nail gun -- she can trim with the best of them). Just unplug the tool for a month or two and see if you can live without it in your workflow... If yes, then you have some data to base your decision. Quote
pghmyn Posted January 24, 2013 Report Posted January 24, 2013 If you have it, and it is not hurting you financially to keep it, I would say find a way to store it. It can always come in handy sometime in the future. You never know how much you need a tool until you no longer have it. 1 Quote
mlingenfelter Posted January 24, 2013 Report Posted January 24, 2013 I have nice miter/chop saw and I don't think I've used it for maybe 5 years (except for outside construction projects). I've been thinking about selling mine and just barrow my brother's when I need one for outside projects. Once I made a nice crosscut sled for my table saw, I don't us anything else. I've thought about an MFT and think it would work great for those wider cuts I can't do with the crosscut sled. Like you have a small garage/shop and haven't found a home for a MFT yet. Quote
Eric. Posted January 24, 2013 Report Posted January 24, 2013 I find an SCMS just too useful... Not furniture I'm always surprised when I hear this. I find uses for mine on almost every project. Crosscutting long boards on the table saw sucks, and the SCMS excels at accurate miters and bevels compared with the table saw as well, IMO. If for no other reason, just the convenience factor makes it worth keeping. I like them so much, I have two. Kapex for furniture, and Dewalt standard miter saw for construction/DIY. Quote
Trip Posted January 24, 2013 Report Posted January 24, 2013 -==> I'm always surprised when I hear this. sorry, I changed sentence structure mid-typing and forgot to re-edit... I've gone back and fixed it... I do find the SCMS very useful in furniture... Quote
woodwhisperer Posted January 24, 2013 Report Posted January 24, 2013 I really see these two tools as distinctly different in purpose. I primarily use my MFT for sheet goods and nothing else. It really isn't well suited for cutting thicker materials and odd shapes. But it's a beast when it comes to sheetgoods. A SCMS gets used on every single project from rough breakdown to fine finishing cuts in my shop. I think I might be lost without it. Quote
Dlhunter Posted January 24, 2013 Report Posted January 24, 2013 My SCMS is probably my favorite tool in the portable tool category. It is just so versatile. With the depth stop I have cut dados, rabbets and even tenons. I can't imagine a MFT would handle compound miter cuts very well. Quote
cusas6 Posted January 25, 2013 Author Report Posted January 25, 2013 Thank you all for the comments. I will definitely keep my SCMS around. I don't know that I could have actually parted with it. That simply means I have to get an MFT and maybe a storage unit for all of the wife's stuff... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.