Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Perpendicular Surface Crack

Featured Replies

Hello-

 

I'm trying to fix a small crack on a conga drum of mine. It was submerged in water and developed a crack that runs perpendicular to the wood grain. It isn't deep at all. I've searched for information on how to fix it, but I can't find anything.

 

The crack is about 1.25" long, on the curve of the drums belly, and on the other side of the wood are scoring lines that the builder put in.The drum is made of quartersawn oak. 

 

I was thinking about lightly sanding the crack out, but I'm a little worried that the wood will be too thin as the crack runs along the scoring. 

 

I've attached a photo. Thanks for any help!

 

 

post-11470-0-26600000-1359576098_thumb.j

Might not be the best way, but I would fill the crack with super glue. Dries clear, and will help prevent the crack from expanding any further. 

  • Author

Thanks for the thought. I was thinking about injecting an expanding glue into it as a last resort.

 

I'd like to be able to either close the crack shut or remove it so that it would look good cosmetically. 

I'd like to be able to either close the crack shut or remove it so that it would look good cosmetically. 

 

Not gonna happen.  I'd fill it with epoxy.

Not gonna happen.  I'd fill it with epoxy.

If you decided to go with epoxy, I'm sure you could mix some oak dust into the mix and try to match the color as much as possible. Would help to make the crack disappear. 

  • Author

So, sanding the crack off isn't an option? 

 

I'm hesitant to use epoxy. What about using a wood fill? 

 

Thanks again for the help. My music studio flooded in Hurricane Sandy and I've spent the past few months learning how to repairing and refinishing instruments (and sadly throwing away some that were beyond repair!)

So, sanding the crack off isn't an option? 

 

I'm hesitant to use epoxy. What about using a wood fill? 

 

Thanks again for the help. My music studio flooded in Hurricane Sandy and I've spent the past few months learning how to repairing and refinishing instruments (and sadly throwing away some that were beyond repair!)

The wood filler isn't much for strength for holding the crack from expanding any further. If the crack wants to expand it will crack the brittle filler along with it. Super glue or epoxy are extremely strong, and will help keep the crack from expanding.

 

If you mix oak dust with the epoxy, it almost looks like a filler.

So, sanding the crack off isn't an option? 

 

I'm hesitant to use epoxy. What about using a wood fill? 

 

Thanks again for the help. My music studio flooded in Hurricane Sandy and I've spent the past few months learning how to repairing and refinishing instruments (and sadly throwing away some that were beyond repair!)

Don't be hesitant to use epoxy, it'd definitely your best choice.  If I were feeling adventure some, I might try a dutchman.  I'm crazy like that.  :P

Inject some clear epoxy inside and out with a syringe (no filler as the crack is running across grain; it will stand out like a sore... well... I think you know :-)  

 

Let cure and sand flush.  Chances are no-one other than you would ever notice it :-)  My personal choice is west system using their 207 clear hardener (and their syringe)...

  • Author

You guys have convinced me. All the drum repairs with epoxy I've seen have been a thick dark line. I think clear epoxy, curing, and sanding flush will do the trick. Thanks again for the advice. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.