Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Turn my # 6 wood plane into a #5

Featured Replies

Hey guys,

I have a #8 LN that works great

Just got a #7 Stanley Bailey used from Google + and I plan to use this as a #6

Had a wooden # 6 Stanley ... how about if I just cut it to a #5 length. and this way I have my jack. I am aware that in theory a jack can be turned into a smoother but I also have a 4-1/2LN so I don't need another smoother.

 

This is my cheap way of getting my set of hand tools sort of done and now I can turn into getting saws.

 

What say yousguyseh? yep all together.

I wouldn't cut that down.  I'm not sure what you mean when you say you plane to use your number 7 as a number 6 and your number 6 as a number 5.  The planes numbers only loosely designate the type of work they are for. What matters is how you sharpen the blade (e.g. the amount of camber) and how you choose to use the tool.  When you say use your no. 7 as a no. 6. does that mean use it as a roughing plane or does that mean use it as a trying plane? When you say use your no. 6 as a 5, does that mean use it as a roughing plane?  

 

Here's what I'll say.  

You have a no. 8.  Keep it setup with either straight or very slightly cambered blade.  I'd advise straight.  This will be better for match planing and any track marks it creates on face grain will be removed by a smoother.  Put some camber in your 7, not a tiny amount, not a ton... you'll need to figure how thick of a shaving you want to take with it and than add camber from there. The right amount of camber is the amount that gives you an approximately full width shaving w/o the corners digging in when you are taking about as thick of a shaving as you will (typically) want to take with that plane.  This is the plane you will use for most of you flattening.

 

By wooden No. 6 stanley I assume you mean a no. 28? 18 inches? Do not cut this down.  There is not reason too. It will work great as a fore plane/jack plane/"scrub" at that length. Just put a heavy camber in the iron and go to town.  The extra length will help you to keep things flatter during your rough work.  If you have some need for a no. 5 as either a long smoother, extra short jointer, or just as an even rougher roughing plane, just by one. You should be able to find a decent one pretty easily for under $40.

 

Cheap way.... you have an LN no. 8 and an LN 4 1/2..... that is not the cheap way!..... but it is a very very good way to get started.

  • Author

Chris ... you got the plan. That is why I love this forum. I will follow this path. Thanks.

 

I wouldn't cut that down.  I'm not sure what you mean when you say you plane to use your number 7 as a number 6 and your number 6 as a number 5.  The planes numbers only loosely designate the type of work they are for. What matters is how you sharpen the blade (e.g. the amount of camber) and how you choose to use the tool.  When you say use your no. 7 as a no. 6. does that mean use it as a roughing plane or does that mean use it as a trying plane? When you say use your no. 6 as a 5, does that mean use it as a roughing plane?  

 

Here's what I'll say.  

You have a no. 8.  Keep it setup with either straight or very slightly cambered blade.  I'd advise straight.  This will be better for match planing and any track marks it creates on face grain will be removed by a smoother.  Put some camber in your 7, not a tiny amount, not a ton... you'll need to figure how thick of a shaving you want to take with it and than add camber from there. The right amount of camber is the amount that gives you an approximately full width shaving w/o the corners digging in when you are taking about as thick of a shaving as you will (typically) want to take with that plane.  This is the plane you will use for most of you flattening.

 

By wooden No. 6 stanley I assume you mean a no. 28? 18 inches? Do not cut this down.  There is not reason too. It will work great as a fore plane/jack plane/"scrub" at that length. Just put a heavy camber in the iron and go to town.  The extra length will help you to keep things flatter during your rough work.  If you have some need for a no. 5 as either a long smoother, extra short jointer, or just as an even rougher roughing plane, just by one. You should be able to find a decent one pretty easily for under $40.

 

Cheap way.... you have an LN no. 8 and an LN 4 1/2..... that is not the cheap way!..... but it is a very very good way to get started.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.