Recommended Posts

Posted

I picked up a new (well, used) round-bottom spokeshave off eBay, and it's in decent shape. The iron was pretty dull originally, so I cleaned it up and realized... the cutting is isn't square to the edges. Now, it's correctable - I can skew the iron a bit, and square everything up. Then I realized... none of my planes / spokeshave irons are actually totally square. All are correctable (some require more correction than other) on the tools themselves.

 

At what point should I be concerned and hop on a grinder and just square everything up?

Posted

Hi TFB

 

Unless the irons being a little out of square is a problem don't hurry to grind them square and continue to enjoy using your tools. When you need to sharpen just work the side that's out a little harder. I really like this guys approach to sharpening. Its simple to do and avoids disappearing into ever decreasing circles of grits angles and honing guides. 

for plane irons and 
for chisels.
Posted

Shhh! You're giving away master craftsman secrets :).  That little lateral adjuster can do some amazing things to fix an out of square edge.  I think the only thing is that it be flat (unless you want a camber) so that the lateral adjuster can fix the edge.  The only thing to worry about is if it is getting consistently more out of square because you must be removing a lot of steel each time your sharpen and at some point the lateral adjuster won't help you and then you have a boat load of steel to remove.  This is how people burn blades by accident. 

Posted

I'm sharpening on water stones, so no - I'm not removing that much at a time, nor am I at risk of burning anything :)

 

The blades are all flat (except for a little bit right at the corners where I knocked back my jack plane's iron). Anyway, with most of them, they're just barely out of square (I just re-checked and my woodriver low-angle spokeshave is the only one that's actually square) - which is pretty good considering the mix of used and cheap tools I have. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 52 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined