Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Respirator Clarification Question

Featured Replies

Hopefully this is the right section of the forums for this, and hopefully not a repost, I did a quick search and didn't see much.
 
I am looking at purchasing the 3M Half Facepiece Reusable Respirator 7503/37083(AAD) like the one Marc recommends / uses in Episode 87 - Dust In Time.

 

One thing is keeping me from adding to my cart, which is the verbage that I see both on Amazon and something similar on 3M's website:

 

"3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132)"

 

I am just a hobbyist, not a professional...what is the reason they would intend this only for occupational use? Am I missing something dangerous about this mask / respirator?

 

Thanks all for any informaiton / input you can provide!

It's boiler plate language.  Cartridges for respirators are designed for chemical fumes and you need to match the appropriate cartridge for the material you're working with.  As far as using this for wood dust it's really N/A..  You're looking to filter dust, not fumes :D

 

Hope this helps!

This respirator is a really great thing to have, for woodworking and a whole lot more. In the last week I've used it not only for woodworking, but also for home repair projects that included climbing in the attic to replace a broken recessed fixture, cutting hardie board and cutting into a concrete slab with a diamond blade on an angle grinder (made a bunch of fine dust that you REALLY don't want to breathe). It worked well for all of those, though I'll need to replace the P100 filter after using it with the concrete dust.  It's so comfortable that I sometimes forget to take it off.

 

The only thing I'd really like to change is the hot pink color for the P100 filters. My neighbors look at me funny when I wear it to mow the lawn... :)

  • Author

It's boiler plate language. Cartridges for respirators are designed for chemical fumes and you need to match the appropriate cartridge for the material you're working with. As far as using this for wood dust it's really N/A.. You're looking to filter dust, not fumes :D

Hope this helps!

Makes sense...I thought that might be it. However I will be using for particulate and fumes given finishes, plus any other household dangerous chemicals that may be encountered.

This respirator is a really great thing to have, for woodworking and a whole lot more. In the last week I've used it not only for woodworking, but also for home repair projects that included climbing in the attic to replace a broken recessed fixture, cutting hardie board and cutting into a concrete slab with a diamond blade on an angle grinder (made a bunch of fine dust that you REALLY don't want to breathe). It worked well for all of those, though I'll need to replace the P100 filter after using it with the concrete dust. It's so comfortable that I sometimes forget to take it off.

The only thing I'd really like to change is the hot pink color for the P100 filters. My neighbors look at me funny when I wear it to mow the lawn... :)

Ha I agree about the pink filters! Good idea with using it for mowing! I always come in sneezing and hacking, never even though of using it for that! I better neighbors will think I'm crazy too! Doesn't your face get hot in the summer wearing it?

Makes sense...I thought that might be it. However I will be using for particulate and fumes given finishes, plus any other household dangerous chemicals that may be encountered.

 

 

Honestly, unless you're working with concentrated levels of ammonia or two part commercial paints / finishes it really isn't a concern.  Single part urethanes, varnishes or even lacquers is still a non-issue.  The standard cartridges that come with the mask will be more than sufficient for any fumes you would be exposed to :P... 

 

The only factor is that the mask seals tightly around your face.  My standard  procedure is to fit the mask, cover both of the intakes on the cartridges with my hands and breathe in.  If the mask sucks to my face and more or less holds that suction then it's properly fit...

I'm kind of a respirator nut and own several.  I'm highly sensitive to wood dust, so I'm pretty careful about breathing it in while in the shop.  Most of them PAPR but I also use the 3M 750x model for a lot of my work.  This model is extremely comfortable and you can get all the cartridges you need for woodworking.  Like people said, you'll need the P100 particulate filters which are model 2091.  For finishing, you'll want the organic vapor cartridges labeled 3M 6001.

 

For the particulate model, I also use the 2097 model which is particulate filter with protection from nuisance levels of organic vapors.

 

chris

 

"3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use.

 

This statement means it may only be certified for use in the USA. It may not meet Europe's standards. Companies have different product lines for Europe and the USA. Amazon would be a USA vendor even though they will sell to Europe.

Don

  • Author

I'm kind of a respirator nut and own several.  I'm highly sensitive to wood dust, so I'm pretty careful about breathing it in while in the shop.  Most of them PAPR but I also use the 3M 750x model for a lot of my work.  This model is extremely comfortable and you can get all the cartridges you need for woodworking.  Like people said, you'll need the P100 particulate filters which are model 2091.  For finishing, you'll want the organic vapor cartridges labeled 3M 6001.

 

For the particulate model, I also use the 2097 model which is particulate filter with protection from nuisance levels of organic vapors.

 

chris

Chris, thank you for your response! So many different filters and cartridges out there! I will probably research on their site to make sure I get everything i need, so many part numbers flying around.

 

Do you have any suggestions on the size to get? I would say I'm average size, a bit portly I guess :) but I have a big head! I'm thinking Large will be best, but I don't want to get the wrong size.

 

Thanks again!

  • Author

Honestly, unless you're working with concentrated levels of ammonia or two part commercial paints / finishes it really isn't a concern.  Single part urethanes, varnishes or even lacquers is still a non-issue.  The standard cartridges that come with the mask will be more than sufficient for any fumes you would be exposed to :P... 

 

The only factor is that the mask seals tightly around your face.  My standard  procedure is to fit the mask, cover both of the intakes on the cartridges with my hands and breathe in.  If the mask sucks to my face and more or less holds that suction then it's properly fit...

 

Good idea on the method for checking for a good seal!

Chris, thank you for your response! So many different filters and cartridges out there! I will probably research on their site to make sure I get everything i need, so many part numbers flying around.

 

Do you have any suggestions on the size to get? I would say I'm average size, a bit portly I guess :) but I have a big head! I'm thinking Large will be best, but I don't want to get the wrong size.

 

Thanks again!

 

No problem, Woodmang! 

 

I have both the medium and the large and I'm probably an average size.  I think the large feels a little better than the medium, but I use them both without issue.  I just keep the organic cartridges on one and he particulate on the other.  If I were to recommend one, it would be the large.  If you order from Amazon, they will let you return it if you don't like the fit so you don't have to worry there.

 

Good thing with these newer model half face respirators from 3M is the material is so comfortable that you won't complain about either.  The way it seals to your face is really well done.

 

chris

Respirators size is probably a medium for most people. If your a small person...yep small mask. Conversely, if your a large person...large mask. Also it is recommended if you wear a beard, get a large mask even though you can wear a medium.

 

-Ace-

  • Author

No problem, Woodmang! 

 

I have both the medium and the large and I'm probably an average size.  I think the large feels a little better than the medium, but I use them both without issue.  I just keep the organic cartridges on one and he particulate on the other.  If I were to recommend one, it would be the large.  If you order from Amazon, they will let you return it if you don't like the fit so you don't have to worry there.

 

Good thing with these newer model half face respirators from 3M is the material is so comfortable that you won't complain about either.  The way it seals to your face is really well done.

 

chris

 

I wish they had measurements or something for them. Of course, I don't know what you would measure. I'd like to avoid the hassle of returning and ordering again, etc.

 

How much of a difference would you say there is between the two? Just trying to get some form of idea.

 

Thanks,

Tom

 

 

Respirators size is probably a medium for most people. If your a small person...yep small mask. Conversely, if your a large person...large mask. Also it is recommended if you wear a beard, get a large mask even though you can wear a medium.

 

-Ace-

 

Funny my father in law uses the excuse that he has a beard and thus can't use a respirator. I think he just doesn't want to bother.

FWIW I wear a medium and would say that I'm average size.  6' and 175lbs.  I have facial hair but keep it trimmed pretty short and this size works well for me. 

 

I'm curious if anyone is going to come out and say that they wear a large because they have a big head :o !  Sorry, couldn't resist....

I ended up switching to a large because of a reccomendation from some other users on this forum.  It was a great move.  The medium fit "ok", but I could still smell a lot of fumes coming in.  I ordered the large to give it a try, and it is much much better.  I am about 6' tall and 200 lbs.  I think it's got more to do with the shaping of your face though.  Also, I wear glasses, and the 3M fits very comfortably with the glasses on. 

I went with one of each because they were cheap and just ended up keeping both.  I have a goatee which I keep quite short so the medium does work quite well.  The large just seems to be a little better fit to me overall.  I'd probably still suggest the large over the two if you're concerned.

 

chris

FWIW I wear a medium and would say that I'm average size.  6' and 175lbs.  I have facial hair but keep it trimmed pretty short and this size works well for me. 

 

I'm curious if anyone is going to come out and say that they wear a large because they have a big head :o !  Sorry, couldn't resist....

 

Haha, I'd like to say I don't have a big head, but others may feel different.   :)

 

chris

  • Author

FWIW I wear a medium and would say that I'm average size.  6' and 175lbs.  I have facial hair but keep it trimmed pretty short and this size works well for me. 

 

I'm curious if anyone is going to come out and say that they wear a large because they have a big head :o !  Sorry, couldn't resist....

 

ha I'll admit full well I have a big head. Always have!

 

 

I went with one of each because they were cheap and just ended up keeping both.  I have a goatee which I keep quite short so the medium does work quite well.  The large just seems to be a little better fit to me overall.  I'd probably still suggest the large over the two if you're concerned.

 

chris

 

 

Seems to be the consenus, going with large if not sure. I think I may just get both, if the medium doesn't fit, give it to my wife, if the large doesn't fit give it to my FIL who has a beard.

 

Thank you all for all your input you have been invaluable!

ha I'll admit full well I have a big head. Always have!

 

 

 

 

Seems to be the consenus, going with large if not sure. I think I may just get both, if the medium doesn't fit, give it to my wife, if the large doesn't fit give it to my FIL who has a beard.

 

Thank you all for all your input you have been invaluable!

 

Let us know how you make out.

 

chris

  • Author

Let us know how you make out.

 

chris

 

I didn't realize how cheap they are! I was thinking they werwe supposed to be like $30 per, but Amazon has them for around $20! So I got a medium and a large, and also a set of the 3M P100 Particulate Filter with Organic Vapor Relief, which are the 2097's. I will say though that now my head is spinning with all the different filters and cartridges and what not. This mask can be used for just about anything a homeowner / hobyist may encounter!

 

Any advise on which filters or cartridges to use for what, how long they last, etc? I even see where you can get an adapter to put the particulate filter on top of an Organic Cartridge, so confusing!

 

I know my primary uses will be while mowing the lawn (allergic), sawdust (many species and also plywood, MDF, etc), finishes and paint. I don't know what type of finishes yet because I have never finished a project with anything other than spray Laquer or Poly. (Is that the same thing?). See why my head hurts?

 

Should I post this in a new forum post as it is kind of off the subject of my first question?! SO MANY QUESTIONS! :blink:

Marc recommended the little adapter things which let you use the particulate filters with or without the organic filters.  I keep everything in separate zip lock bags when I'm not using it, and only use the organic filters when I'm dealing with chemical fumes.  I figure that the particulate filter will block things that are bigger than a single molecule, like pollen, fungus spores, and dust.

 

I recommend getting a pair of these: 3M 502 Filter Adapter for 3M 2000 Series Hepa Filter.

  • Author

Marc recommended the little adapter things which let you use the particulate filters with or without the organic filters.  I keep everything in separate zip lock bags when I'm not using it, and only use the organic filters when I'm dealing with chemical fumes.  I figure that the particulate filter will block things that are bigger than a single molecule, like pollen, fungus spores, and dust.

 

I recommend getting a pair of these: 3M 502 Filter Adapter for 3M 2000 Series Hepa Filter.

 

Awesome, I saw those, I will get some. So the pink Particulate filters should handle everything I mentioned except painting, staining, etc? Is there a different filter then for Spray painting or staining since the liquid is vaporized? Not sure how the filters work. Any idea how long these filters last / how to tell when they are done?

 

Thanks for the advice!

The ones I listed in the above post will pretty much cover you for everything you're doing.  The particulate filters will be what you need for mowing and such.

 

chris

Ha I agree about the pink filters! Good idea with using it for mowing! I always come in sneezing and hacking, never even though of using it for that! I better neighbors will think I'm crazy too! Doesn't your face get hot in the summer wearing it?

 

 

It does get pretty hot here in the summer, but the tradeoff is worth it to me.  I have chronic sinusitis and also reactive airway disease (essentially asthma, but not as persistent if I avoid the triggers). Wearing the mask helps noticably with both of these, so the few minutes of mild discomfort is offset by days or weeks of not having those other symptoms.

 

I'm really grateful to Marc for introducing me to this respirator. It has made a huge difference for me.

If anybody is interested in any PAPR reviews, I posted one a while back that you should be able to find with a search.

  • 2 weeks later...
  • Author

Let us know how you make out.

 

chris

 

I ended up getting both the medium and the large. After trying both on, they both would probably work and are quite comfortable, if anything the large is almost too big.

 

They both provide a good seal (tested by covering either the exhaust port and exhaling and also by covering the inlet holes and trying to breathe in, no noticeable leaks. I think more than likely I will stick with the large and give the medium to my wife, it may even be too big for her!

 

I will say over all a very nice respirator, very comfortable. Just wish they would recolor the particulate filters now!

 

Thanks again everyone for your input and help!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.