Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Paint onto unfinished Maple Kitchen

Featured Replies

Hi Folks,

 

So after a year of knocking down walls, wiring,plumbing, laying hardwoods and assembling my made in the USA cabinets from Barker Cabinets, it's time to paint the cabinets and I'm suffering from paralysis by analysis!.

 

Dear wife wants me to get a painter in to spray them but I've done everything up to this point in this remodel and am determined to do spray the cabinets too :) Now I've never sprayed paint before..

 

The cabinets came sanded to 180 grit

 

I bought a HVLP from Wagner http://www.amazon.com/Wagner-518080-Control-Spray-Sprayer/dp/B003PGQI48/ref=cm_rdp_product and have been practicing on some old doors with decent results. I've bought this from SW http://www.sherwin-williams.com/homeowners/products/catalog/premium-wall-wood-primer/?referringCategory=interior-paint-coatings/primers/ for the primer and a latex paint for the top also from them http://www.sherwin-williams.com/homeowners/products/catalog/duration-home-interior-acrylic-latex/?referringCategory=interior-paint-coatings/paint/

 

I also want to spray some type of poly on top if it's recommended.

 

Open to any and all criticism,tips even abuse if deemed necessary

Dude, you so seriously need to listen to your wife. You spent a year of your life getting this far and the most important part of the project, the part you'll be looking at every day from now on you think you can handle with a $100 sprayer and a couple hours practice?

 

Or maybe you have a doghouse with HVAC, cable and internet you're just dying to move into?

Socal, I'm afraid Bill is right. However, if you do choose to paint them yourself, by all means, don't topcoat with poly. It will yellow your finish and leave you with a mess that will require you to start all over again. I appreciate the fact that you want to see this through until the end, but there are some things that are better left to the experts. Your wife's kitchen is one of them. In situations like this, I ask myself, what would it be like if it turns out that she is right.

BTW, if I'd spent a year redoing our kitchen I would have woken up 9 months ago with boiling wax in my ear...

 

Your wife is a Saint, she's put up with her most sacred space in the house out of commission for a year now, don't piss her off any more than you already have. You have no idea how lucky you are to still be breathing....

  • Author

  :wub:  Actually nearer to 15 months BUT in my defense it involved knocking 3 rooms into one, moving water heater 15 feet,new bathroom off kitchen,new ceilings, removing 1,000'ft of floor tile leveling the slab, replacing windows with double french doors and vice versa , texture and paint the walls and then gluing 1,000' ft of  engineered hardwood on my own whilst having a real job(and no life).

 

I'm just so close, so so close.. A compromise may be I do one door myself and see how it turns out, I could post  a photo here for critical analysis :)

 

Wife is an angel though  :rolleyes:

Give it a shot, Socal. The worst you can do is ruin one door, and you can always sand it back down and let a painter re-do it. Best of luck and hang on to that angel.

  :wub:  Actually nearer to 15 months BUT in my defense it involved knocking 3 rooms into one, moving water heater 15 feet,new bathroom off kitchen,new ceilings, removing 1,000'ft of floor tile leveling the slab, replacing windows with double french doors and vice versa , texture and paint the walls and then gluing 1,000' ft of  engineered hardwood on my own whilst having a real job(and no life).

 

I'm just so close, so so close.. A compromise may be I do one door myself and see how it turns out, I could post  a photo here for critical analysis :)

 

Wife is an angel though  :rolleyes:

 

Your wife IS an angel, my subs could do all that in less than a month. But they want to be paid when they're done.

 

Do what you want. Have fun.

Dude, you so seriously need to listen to your wife. You spent a year of your life getting this far and the most important part of the project, the part you'll be looking at every day from now on you think you can handle with a $100 sprayer and a couple hours practice?

 

Or maybe you have a doghouse with HVAC, cable and internet you're just dying to move into?

 Best advice ever. We sub out our spray finishing and would never attempt using a sprayer like yours on a Kitchen. As with most things practice spraying on some easy jobs that are easy to re-finish or don't matter if the finish is not the best (not your kitchen). Is you kitchen a contemporary or traditional look?

  • Author

The cabinets are a Shaker inset panel type, unfinished maple. I've been trying my hand at spraying some interior doors in my spray booth that I set up with pretty decent results,not perfect mind.

 

The good news is that I got a call last night to say that a friend is coming to visit next month who sprays vintage  cars for a living, so after he stops laughing at my idea he might give me some tips. So as regards the paint I plan to use, is that OK just don't use the poly?

 

I appreciate your time folks(wife says I don't appreciate my own though!)

Enduro-Black-White-Underct_1.jpg

 

Enduro-Black-Poly.JPG

(Can indicates black, they also have white and is tintable.)

 

If your going to spray, get something meant to spray and is rated for kitchen environments.

 

As to a topcoat, some folks like them some don't. My opinion it does helps with durability and helps to prevent metal marking. 

 

-Ace-

Your friend should be a great help. Some time spent with him and his opinions on your equipment would be really good. I would be interested to see what others say but I would avoid the poly. If the doors look worn in the future or you want to change color the absence of poly would make that much easier. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.