-
T track.
Order it from McMaster.com. Way cheaper.
-
Anybody tried the bessey revo jr clamps?
I have a few. I like the lightness and they have plenty of power. One was defective but Bessey sent me a new jaw with no problems. However the jet clamps are FAR superior so I'd spend the extra and get those.
-
Letting Fine Woodworking online membership lapse
Hope people don't mind but I alerted Matt to the thread - we go way back ( just kidding ). My top three recommendations are 1) videos on an iPad don't have a maximize button 2) I'd love to see the videos be HD 3) my favorite part is the video workshops and I'd love to see them be continuous without a few (or more ) weeks break like is currently happening. Can you get becksvort to do one?! And you should have a contest, that I win, to watch him make it. Since I grew up 10 minutes from him I should get to hang out with him Ill look into turning my ads off but I'd at least mention to the developers that they should auto hide if the person is a member Thanks Matt for participating, it makes the magazine look good.
-
Letting Fine Woodworking online membership lapse
I love the online information but I don't like the new website either. It's not easy to navigate and there are too many adds given its a paid site -for some anyway. I'd like to see it recognize that I paid and hide the ads. But mainly I'm not a fan of the new layout
-
What brand router bit?
+1 on whiteside
-
Domino, Domino XL or Both
Hey guys I'd love to have a Domino but now that the XL is out I'm not sure which is better/more useful to the average hobbiest. Is there an overlap in the size of the mortise it will make or would you (ideally) need both? I can certainly see the benefit of having the longer/wider tenons but does the XL make small enough mortises to be used all all my projects. For instance, lets say I want to make a small Shaker side table. While the XL is probably overkill, is it even useful or its just too big anyway. Thanks Steve
-
how do I prevent blotching?
I did a review of Charles Neal's stuff to. Works great. Www.thedustydeveloper.com
-
Wood Shop Flooring Options
Look into cork
-
Shop grade plywood vs Cabinet grade plywood
I'm certainly no expert but shop grade is usual like D4 grade plywood meaning it has the worst faces possible. Cabinet grade will be A1,A2 or B2 so it will be much nicer. Letter grades on the front a,b,c or d and 1-4 on the back. Typically big box home improvement stuff will be warped and the veneer is very thin. Cabinet grade is much nicer. I'd like b2 or better but a1 is generally pretty expensive
-
Need Dado blade stack recommendations
Best bang for the buck is the delta set. 35-7670. 99 on amazon. I got a used one for like 60. Perfect flat bottoms and no tearout except for melamine once. U will get tiny bat ears. I think the dewalt set is the same one
-
Build Your Own Marking Gauge
Thanks Guys - I appreciate the kind words - makes it worthwhile to continue posting. I've been mostly lurking - I've posted a few times and just joined the Guild. I've been wanting to for a while and the site troubles forced my hand. Steve
-
Build Your Own Marking Gauge
If you are interested in building your own marking gauges, I’ve just posted a blog entry and a video on YouTube. Feel free to check it out. This one is made from Osage Orange and Cocobolo. http://www.thedustydeveloper.com/2012/03/build-your-own-marking-gauge.html Thanks Steve
-
An Uncomfortable Request
Mark Based on your inspiration I started a blog which, I won't plug, and I've finally received a google Adsense check. I will gladly contribute that and join the guild. I'll be signing up tonight. Steve
-
Dog Holes!!! Help!
Take a 1 inch or more think piece of stock and drill two 3/4" hole all the way thru it at the spacing you want you dog holes. Then put a fence on the bottom side of the board spaced 2, 3, 4 inches on center from your hole. However far away from the edge you want your holes. Put the fence up against your bench clamp it down and drill both holes. Then move the board over 1 hole and put a bench dog in the other hole. This will ensure perfect spacing and prevent the top of the bench from tearing out. Something like this....hope that makes sense. Fence Dog Hole | o | | o
-
Table saw horse power needed to cut thick hardwood stock?
Make sure you use a ripping blade. 24 tooth and thin kerf can help as well especially if you have 1.5hp saw.