Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Bench Top Laminate or Not?

Featured Replies

Hi, I'm in the planning stages of building a work bench. I've been using saw horses and a piece of MDF, so this is a big step up. I would like to make it multi-task and also work as an out feed table. I'm looking at basing it off one of two plans from Popular Woodworking, both by Chris Schwarz(the $175 Workbench and the 24 Hour Workbench). Besides a few little things in the joinery they have basically the same yellow pine base, the difference is the top. One has four pieces of baltic birch glued up to make a 3" thick top and the other is a more tradition laminate top made from the yellow pine. I'm just wanting some opinion or pro's and con's on each method. 

 

Thanks!

I think the biggest benefit of the laminated top is you'll be able to resurface it after a few years of abuse. I would think it would be less expensive to build, too.

I'm with Vic on this one. The laminated top would allow some resurfacing after it gets used and abused, not to mention the ability to get it dead flat. With the ply top you're kinda stuck in your options for re-leveling; unless you don't adhear the top sheet to the other 3 plys with glue...you'd be able to swap that piece out or flip it over after it gets beat up. After having worked with both types of tops I don't believe I'll be going back to the ply version anytime soon.

If your a hand tool guy a more traditional top is great. If your not then ply with formica is great and always looks new. Easy to clean and if you build it right it will always be flat enough.

Don

The $175 workbench is 38" tall, does the article address way it is so high? That is way too tall for me and Schwarz is a tall guy but he's written that he prefers a bench closer to 34-35".

 

This one from a '95 issue of Wood has some nice features, dowels on the stretcher (bottom shelf) help prevent dust build up and dog holes on the legs support front clamped pieces. The picture doesn't show it but it has 2 vises and dogholes across the top. What I don't like is the legs and stretchers are joined with stub tenons and drawn together with threaded rod, I would probably change that. It's 20" deep, 48" long, and according to their website is 35" high but I have the plans in front of me and it's closer to 34.25".  The plans have a laminated top but also a plywood option if you go that way. Plans are online or you could adapt any of the features to the Schwarz bench.

 

http://www.woodworkersworkshop.com/store/index.php?app=ccp0&ns=prodshow&ref=31_DP_00065

 

jz8e8aW.png

Hi spliterking,

 

Listen to Vic, and go laminate (take a look at his bench too, it's epic). The laminate top will be forgiving and as Vic says easy to resurface. We use 8' x 4' size benches at work with and single sheet 3/4 OSB or ply top on a sturdy framework and they work well for our type of work. However when I do make a bench for myself I want to have solid timber.

  • Author

Thank you to everyone. It looks like the laminate would be best for me. I do a mix of hand tool and power tool work. Lately I've being running in to stock to wide for my 6" jointer and not wanting to cut it down. So I've been using my No. 5 in combination with the jointer to flatten it. Thus holding work for hand planing is pretty important. 

+1 for Don's suggestion. I love a formica top on my workbench/outfeed table, because it's so easy to clean up and your material slides so easily over the surface when you push it out of your saw. Glue just wipes right off or if you wait too long, it pops right off with a chisel.

lamination is great stuff for your lay out tables and some glue up. But you still need your solid Oak or Maple Bench. 

These are tables you can pair onto and down right beat on. 

For benches that are going to be used with holdfasts, clamps, and assorted stops and hooks, with both hand and handheld power tools, I greatly prefer a heavy, thick laminated top, finished only with a light rub of Danish Oil.   The almost raw wood surface provides traction that helps the stops work, the thickness makes holdfasts work, the weight keeps it in place, and it's simple to clean up and repair.  I usually put down a strip of rosin or brown paper when gluing on this one.

 

For worktables, machine outfeed and extension tables, assembly / glue-up tables, etc... I completely prefer plastic laminate on MDF or plywood, edged with a hardwood bumper.  It's slippery, as well as glue and solvent-resistant.  I'll hit these occasionally with Top Cote, wax, or Top Saver, when I've got the stuff out to hit my cast iron.  This helps stuff slide and makes glue flake off even easier.

 

Once you get used to pop-up stops, bench hooks, holdfasts, etc... on a non-slippery surface, you'll hate having to operate a vise, or loosening and tightening clamps, every time you move your work.   This doesn't just apply to hand planes and chisels, but also to power tools, including biscuit joiners, belt and orbital sanders, small routers, etc...   Easily moved work is safer and more accurate, as it eliminates the temptation to make that "one quick trim" with the chisel facing your body, or hand planing in a contorted position, downgrading your results.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.