Freddie Posted March 3, 2013 Report Posted March 3, 2013 I currently own a bosch 4100 table saw, which is a great saw in its own right. For the purposes I intend to use a table saw for however, I would prefer something more suited towards dedicated shop use, along with stability and accuracy. My current project, which is an 11' long back bar consisting of bases and uppers, I seem to have maxed out my saws capacities, and sought other methods to build this project. Although in a small one man shop, it would be nice to have a saw that would aid in faster production, repeatability, yada yada yada. Here comes my question; for a mix of furniture and cabinets, which style saw would be my best route to pursue. Would I be fine with a traditional cabinet saw with a 52" rip fence, or would I be better off going for a slider. The traditional cabinet saws I have been looking at ( confused on which one between the three) http://www.grizzly.com/products/10-Heavy-Duty-Cabinet-Table-Saw-With-Riving-Knife/G0651 http://www.grizzly.com/products/10-3-HP-220V-Cabinet-Left-Tilting-Table-Saw/G1023RLX http://www.grizzly.com/products/10-3HP-220V-Cabinet-Table-Saw-with-Long-Rails-Riving-Knife/G0691 And the slider thrown in http://www.grizzly.com/products/10-Sliding-Table-Saw/G0623X Note* Each of these saws is within my price range, I just want to know from anyones personal experience which saw would best suit my needs for years of headache free furniture and cabinet making in a scaled down one man shop. Thank you! Quote
dwacker Posted March 3, 2013 Report Posted March 3, 2013 Your always going to be better off with a slider if you have the space. All sliders are not equal. Cheap ones are more hassle than they are worth. Do your research, I'd stay away from griz sliders they have a bad reputation in the cabinet industry. If not a slider then a good fixed saw is plenty. I have no problem cutting sheet goods on a fixed full sized saw. Quote
tim0625 Posted March 3, 2013 Report Posted March 3, 2013 Personally, I don't see a lot of difference in the 3 saws. Might be a question for a Griz rep. I called them a few times before purchasing my 1023RLWX and they were really helpful. I've really enjoyed my saw so far and have no complaints. I got the 1023 with 5 hp because the price was about the same for a 690 with 3 hp. I don't really need the extra HP; but what the heck....2 more HP for $100...I'll do that. Also the 1023 has the serpentine belt that makes it smoother running. For the price differences.....have you considered the 1023RLWX for $1395? I got mine with a coupon from the Griz catalog and got it for $1250 a year ago. Quote
wdwerker Posted March 3, 2013 Report Posted March 3, 2013 I have an Excalibur sliding table attached to a UniSaw , makes cross cutting panels a breeze. It does take up a good bit of space if your shop is small. This add on let's you choose the saw and get the slider at a future date. Quote
Freddie Posted March 3, 2013 Author Report Posted March 3, 2013 I just started looking into the grizzly slider yesterday, it was a random thought that ran across my head. I had found a few reviews from people who seemed pretty happy with their purchase, the slider that is. http://www.sawmillcreek.org/showthread.php?165779-My-Grizzly-G0623X-Sliding-Table-Saw-Assembly-and-Usage-Review http://www.ncwoodworker.net/forums/showthread.php?t=46645 As you all know, its pretty common to find reviews online of the 690 and 1023. After extensive research, I was only able to find one thread on the g0651. I guess for a company who offers very similar saws with slight differences, the average consumer is going to purchase the lower priced saws. But if you did go with a slider, would you still be able to do all the traditional cuts you did on your old cabinet saw? No loss, only gain right?Or are there things you sacrifice with that style saw? Quote
Eric. Posted March 3, 2013 Report Posted March 3, 2013 Unless you're running a cabinet shop and pumping out the sheet goods, I don't see the need for a slider. Seems like more trouble and expense than it's worth otherwise. As a hobbyist, I'd much rather have a traditional cabinet saw and add a track saw and a nice big crosscut sled for breaking down ply. I have the 0690, the same as the 0691 only with shorter rails...my shop just wouldn't allow the 0691. I don't know if they've incorporated the riving knife into the 1023, but at the time I purchased mine, they hadn't, so that's why I went with the 0690. It's been a great saw, I love it. Plenty of power, and smooth as silk even without the serpentine belt...the 1023 must purr like a Ferrari if it makes that much of a difference. My only complaint is that the fence could be better...not for any other reason except the UHMW plastic has some dips in it where it's bolted to the steel tube. But I hear this is a problem with many of the Biese clones and the Biese fences themselves. Some people say it doesn't matter, but I disagree...I will occasionally get a very slightly, but still obviously, imperfect cut because of those dips in the fence. I intend to upgrade to that way super awesome cool fence or whatever it's called that Marc reviewed recently...when I can afford it. But the saw itself...solid. Quote
dwacker Posted March 3, 2013 Report Posted March 3, 2013 I just started looking into the grizzly slider yesterday, it was a random thought that ran across my head. I had found a few reviews from people who seemed pretty happy with their purchase, the slider that is. http://www.sawmillcreek.org/showthread.php?165779-My-Grizzly-G0623X-Sliding-Table-Saw-Assembly-and-Usage-Reviewhttp://www.ncwoodworker.net/forums/showthread.php?t=46645 As you all know, its pretty common to find reviews online of the 690 and 1023. After extensive research, I was only able to find one thread on the g0651. I guess for a company who offers very similar saws with slight differences, the average consumer is going to purchase the lower priced saws. But if you did go with a slider, would you still be able to do all the traditional cuts you did on your old cabinet saw? No loss, only gain right?Or are there things you sacrifice with that style saw? Yes you can do the same cuts. A slider that won't stay square is worthless. Quote
RJsumthn Posted March 3, 2013 Report Posted March 3, 2013 For around the same price as that slider, have you considered a SawStop. Here is the the 3hp 52" version. I had an accident a couple months ago with my portable job-site TS and that made me realize how valuable a SawStop really is (luckily I only need 4 stitches and I am only left with a barely visible scar). As soon as I can afford one I will be getting it. If you have an accident with a regular saw you have to consider: - time you lost going to the ER - cost of the ER - time you take off to recover - added time to work with an injured hand (you won't be as efficient) Depending on the extent of the injury this could cost well over $1000 dollar. And not to mention the cost of possible losing a finger. With a saw stop you the cost would be: - replacing the cartridge - a new blade - a bandade for the scratch To me the piece of mind would be priceless. I went to the Lie-Nielsen Hand Tool Event a couple days ago and I saw a hand full of guys with missing fingers and I don't want that to happen to me or anyone else for that matter. When working with a Table saw it more of a question of when you will have an accident, not if. Most accidents happen to guys with a lot of time behind a saw because they get comfortable with the machine. Quote
Freddie Posted March 3, 2013 Author Report Posted March 3, 2013 Sawstop is not on my list. I read somewhere else that someone compared a slider to the sawstop and ruled out the slider to be safer for his intended use, being that he would be further away from the blade. This is probably a good topic to discuss. Quote
Freddie Posted March 3, 2013 Author Report Posted March 3, 2013 I just remembered, I went to dynamite tool in bohemia ny to pick up a few things. I was talking to the salesman on the floor and he was trying to sell me the unisaw. They are also a sawstop dealer, and he didnt try to push it at all. His opinion was that the safety feature will work until you have to turn it off for conductive materials, then that line of defense is cut off. He also carries powermatic but he insisted that the unisaw was the best cabinet saw. Comes with a hefty price tag too. But it does have alot of cast iron table before the blade, 5hp marathon motor, one piece trunnion and both hand wheels on the front of the cabinet with that sweet bevel dial. I will admit, I was impressed, it is alot of saw, but it is also alot of money. Bottom line, he was not impressed with the sawstop or pm2000, and I was kind of suprised to hear that! Quote
Autorotate Posted March 3, 2013 Report Posted March 3, 2013 Freddie, I think that any of the big name brand saws (Grizzly, Delta, Powermatic, Sawstop...) will make great cuts and last a lifetime as long as they are tuned up and properly maintained. Any of them will be a huge improvement over what you have. You just have figure out what options YOU want, be it a flesh sensing technology, warranty offered, price, or even the color of the machine ether way they are all quality machines. I have a Sawstop which I love. Before that I had a steel city with granite top which I loved too. I just decided that for me I wanted the extra safety feature. But the steel city worked great. It just comes down to what options you want to pay for. all of them have quality. Quote
Freddie Posted March 3, 2013 Author Report Posted March 3, 2013 Thanks for the replies guys. Maybe a sit down with the gf or parents will help to push the issue of one of the more spensive saws haha. Its my money, but if we all can come to an agreement, it would be money well spent in everyones minds. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.