Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Airless

Featured Replies

I'm taking on a big finish job appx 100 gallons. Thinking about buying a graco magnum x7 with fine finish tips for WB lacquer. Haven't used airless in 20 years. Would this $400 sprayer work for this job or should I step up a step or two.

PB, I checked out the specs on the Graco site and the mx7 seems like a decent machine. It's 5/8 hp and will support a max. length of 100ft of hose. I didn't see any indication whether it is a diaphragm pump or not, but you can ask the graco rep about that. It is my understanding that the diaphragm pumps are not as good as the piston pumps.

  • Author

PB, I checked out the specs on the Graco site and the mx7 seems like a decent machine. It's 5/8 hp and will support a max. length of 100ft of hose. I didn't see any indication whether it is a diaphragm pump or not, but you can ask the graco rep about that. It is my understanding that the diaphragm pumps are not as good as the piston pumps.

It seems like a homeowner unit but really I just want to get this one job out of it. The bigger ones are rated but these cheaper ones dont have a rating. I guess the question should have been do you think it would last for 150 gallons.

Don,  I use airless quite often and though I am not exactly familiar with using that exact model.  I would say even the cheapest of cheap airless would make it through 150 gallons.  My Uncle is a pro painter and has used almost every type of graco I can ask him to be sure but I would say you shouldn't have a problem.  You could even get away with one from Harbor Freight.  But the graco will give you a lot of tip options. The graco 390 would be a lot better but twice the price. 

  • Author

Don,  I use airless quite often and though I am not exactly familiar with using that exact model.  I would say even the cheapest of cheap airless would make it through 150 gallons.  My Uncle is a pro painter and has used almost every type of graco I can ask him to be sure but I would say you shouldn't have a problem.  You could even get away with one from Harbor Freight.  But the graco will give you a lot of tip options. The graco 390 would be a lot better but twice the price. 

Thanks. I went to HD and asked the paint guy. He said they get the cheap ones back for warrany issues all the time and warned against buying it for a big job. I think if Im going to spend the money on something more durable I might as well just get a kremlin or ca and think of it as a more long term investment than a single job thing.

Are you looking into a AAA (air assisted airless)?  I have two in my shop both are Graco one merkur and one merkur ES.  CA makes an ok unit they are well prices and really cheap on Sprayguncaptain.com.  If you are going to be spraying that much lacquer and want to spend the money on a AAA i would go for it.  I love my AAA's and have put a lot of lacquer through them over the past few years.  hope this helps.

  • Author

Are you looking into a AAA (air assisted airless)?  I have two in my shop both are Graco one merkur and one merkur ES.  CA makes an ok unit they are well prices and really cheap on Sprayguncaptain.com.  If you are going to be spraying that much lacquer and want to spend the money on a AAA i would go for it.  I love my AAA's and have put a lot of lacquer through them over the past few years.  hope this helps.

Yup. At first I was just thinking Id get a airless and use it for the job and then just keep it to paint my fence or something. Couldnt really justify trying this job with an hvlp turbine. The HD and SW guys suggested a $1500 graco but IMO that is sort of a waste when I can get a Kremlin aaa for just a little more. I already have the inline heater so might as well just go for it or buy the cheap one and expect to take it back half way through the job.

Perhaps have you even thought about buying a pressure pot?

And just out of curiosity. How do you adjust the fan size on those guns?

  • Author

Perhaps have you even thought about buying a pressure pot?

And just out of curiosity. How do you adjust the fan size on those guns?

I already have a pressure pot but only a 4 stage turbine. This is an onsite finishing job so need portability. A turbine does not have a 100% duty cycle. Airless sprayer fan adjustment is done buy changing the tip to a smaller or larger fan size, fan size is @ 12". AAA's are just like any other hvlp gun with the exception that they use a low pressure pump and air to atomize, but very little air.

I already have a pressure pot but only a 4 stage turbine. This is an onsite finishing job so need portability. A turbine does not have a 100% duty cycle. Airless sprayer fan adjustment is done buy changing the tip to a smaller or larger fan size, fan size is @ 12". AAA's are just like any other hvlp gun with the exception that they use a low pressure pump and air to atomize, but very little air.

I have access to two different airless systems a Kremlin and a Merkur ES, however both guns can adjust the fan, but only the Kremlin can adjust the material too. 

 

I must ask if you have a budget? 

Don, with the amount of volume you need to spray, wondering why you don't use a pump w/ air assist?  Kremlin has a nice unit (10-14) that is portable and would really cut down on the amount of mixing time.  The pump isn't cheap but guessing you already have a gun that could work with it?  Would be able to use it with your current operation as well. 

 

Just a thought :)

  • Author

Don, with the amount of volume you need to spray, wondering why you don't use a pump w/ air assist? Kremlin has a nice unit (10-14) that is portable and would really cut down on the amount of mixing time. The pump isn't cheap but guessing you already have a gun that could work with it? Would be able to use it with your current operation as well.

Just a thought :)

Im really just looking to get off on the cheap. I dont want to buy more than needed just for a one time job that I'll never use again. The thought of a $400 airless seemed reasonable for the ease and portability. I already have a wall mount Kremlin pump system but dont want to scavenge and convert to portable. It would cost more than a cheap airless to convert the wall mount to a portable and I would have to lug the air compressor back and forth.

I guess if I went with a cheaper ca aaa I could use it in the shop but they are to big of a pain to clean out and prep for a different finish. Thats where turbines are nice, just flush the gun and change finishes.

At any rate I went against everyones advice. I just went to Lowes and bought their cheap graco for $400 with in store warranty if it dies well I guess Ill have to take it back and get another.

Im really just looking to get off on the cheap. I dont want to buy more than needed just for a one time job that I'll never use again. The thought of a $400 airless seemed reasonable for the ease and portability. I already have a wall mount Kremlin pump system but dont want to scavenge and convert to portable. It would cost more than a cheap airless to convert the wall mount to a portable and I would have to lug the air compressor back and forth.

I guess if I went with a cheaper ca aaa I could use it in the shop but they are to big of a pain to clean out and prep for a different finish. Thats where turbines are nice, just flush the gun and change finishes.

At any rate I went against everyones advice. I just went to Lowes and bought their cheap graco for $400 with in store warranty if it dies well I guess Ill have to take it back and get another.

And how's it working it for you? I may consider getting one as well now. :)

 

And just remember don't use solvent based lacquer. I see you are using waterbased or borne lacquer so that's good!

  • Author

And how's it working it for you? I may consider getting one as well now. :)

 

And just remember don't use solvent based lacquer. I see you are using waterbased or borne lacquer so that's good!

Dont know still in the truck. I might try it tomorrow.

And how's it working it for you? I may consider getting one as well now. :)

 

And just remember don't use solvent based lacquer. I see you are using waterbased or borne lacquer so that's good!

 

Why not solvent based lacquer?  I and several other people i know, and have worked with, have, and still do spray solvent based finishes through airless sprayers...

  • Author

Why not solvent based lacquer?  I and several other people i know, and have worked with, have, and still do spray solvent based finishes through airless sprayers...

The cheap ones need a solvent based upgrade kit. Dont know what's in the kit.

Thanks, Don,

So i have to ask what type of job did you get spraying that much WB lacquer onsite?

  • Author

Thanks, Don,

So i have to ask what type of job did you get spraying that much WB lacquer onsite?

I'm doing the spraying for a contractor in a court house. Jury boxes, judge benches and veneered walls. Honestly its a friend in a bind that couldn't fine a finisher that could pass the back ground check. I don't do this sort of stuff normally. Most of the guys hire illegals or have a DUI or something that keeps them out of the government work.

I'm doing the spraying for a contractor in a court house. Jury boxes, judge benches and veneered walls. Honestly its a friend in a bind that couldn't fine a finisher that could pass the back ground check. I don't do this sort of stuff normally. Most of the guys hire illegals or have a DUI or something that keeps them out of the government work.

 

Guess they will have to close the court house. Or you have to work pretty damn fast.  :) 

 

-Ace-

  • Author

Guess they will have to close the court house. Or you have to work pretty damn fast.  :) 

 

-Ace-

Thats what nights are for. Lawyers dont work after 5 they are all at the bars by 4. :)

Why not solvent based lacquer?  I and several other people i know, and have worked with, have, and still do spray solvent based finishes through airless sprayers...

  

The cheap ones need a solvent based upgrade kit. Dont know what's in the kit.

The regular hoses are not solvent resistant and will 'chew' through the hoses and seals. This is the price you get for going cheap. Although the kit is about $60 which include the proper seals, hoses and whatnot.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.