mking1 Posted April 29, 2013 Report Posted April 29, 2013 Just received and installed my new 55 deg frog for my no. 4 hand plane. Anyone have tips or experience using this modification. Miles Quote
G S Haydon Posted April 30, 2013 Report Posted April 30, 2013 Hi Miles, Tell me a bit more is it a LN frog on a LN plane or a hybrid? Why did you fancy the 55 frog? Quote
TerryMcK Posted April 30, 2013 Report Posted April 30, 2013 I could do with a HAF for my #4 as I have some particularly difficult imbuia burr that looks as though it will tear out as soon as I look at it. It's on a top of a baritone electric 6 string guitar I'm making. I was lucky when I put it through the planer taking very small cuts. Even my LN #85 scraper plane is frightened of it! i would also go with the 55 degree HAF as the #4 is still slicing the grain as opposed to the scraper which is shaving and burnishing. Quote
mking1 Posted May 1, 2013 Author Report Posted May 1, 2013 GS Haydon: Yes it is a LN no. 4 and I saw a video of someone demonstrating this 55 deg frog and the tear out free surface it left behind. Also it looked like grain direction had little effect on quality of the finish as long as the cut is very small. I've yet to test these claims completely but preliminary efforts have proved true. So I was looking for someone who has similar results or could offer some suggestions. Miles Quote
G S Haydon Posted May 1, 2013 Report Posted May 1, 2013 Hi Miles, Sounds great. I would love to have a go on one of those. I'm currently preparing some vintage record bench planes as I can't yet justify the cost of an LN product. I think I might ask for some tool vouchers for Birthday/Christmas and give an LN product a try. Would most likely be a number #4 smoother, something I would use a lot. 1 Quote
dsaracini Posted May 5, 2013 Report Posted May 5, 2013 Hi Miles, Sounds great. I would love to have a go on one of those. I'm currently preparing some vintage record bench planes as I can't yet justify the cost of an LN product. I think I might ask for some tool vouchers for Birthday/Christmas and give an LN product a try. Would most likely be a number #4 smoother, something I would use a lot. I'd chip in $20 USD on it! Quote
CessnaPilotBarry Posted May 6, 2013 Report Posted May 6, 2013 I switch to my high angle planes when I experience or expect tearout with lower angle planes. Standard angle planes are easier to push, so if they work, I use them. If I don't know how wood will behave, I try the back, or some other hidden surface first. I also keep a jointer plane set up high angle, and it's my go-to match joint tool after machine jointing. The high cutting angle allows the plane to cleanly cut reversing grain, a common occurance when bookmatching panels. Quote
G S Haydon Posted May 6, 2013 Report Posted May 6, 2013 "I'd chip in $20 USD on it! :)" Thanks FB Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.