Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Chop saw DC

Featured Replies

My take on a well-worn solution to dust collection for an inexpensive chop saw: A big box with an outlet for a 4" line.  Only significant departure is using pegboard for the rear wall, sort of like a downdraft sanding table stood on end.  Works well enough (even with a small collector) thus taming one of the messier tools I own.

post-211-0-55014400-1367371325_thumb.jpg

post-211-0-33881900-1367371334_thumb.jpg

post-211-0-25601400-1367371342_thumb.jpg

Damn, Rob! You really shoe horned that sucker in there!! :lol::D  Can you miter still? I envy your now cleaner shop, wish I was at that stage...

Nicely done. I saw something similar in one of the shop tours on the TWW main site. He had added those plastic strips you see at the entrance of commercial walk-in freezers to catch any dust that comes forward. Looks like that might not be necessary based on your experience.

Dust collection is an area I'm going to need to start thinking about,and I'm learning a lot from those of you who have tackled this already.

  • Author

Fair enough, Bob.  Let it be mentioned that I went through a few bad ideas before getting to this one.  Near as I can tell, there are two approaches to dust collection with a chop saw:

 

Most saws (this DeWalt included) are built with a small port right at the base of the saw.  With a standard shop vac, the majority of coarse chips coming off the blade can indeed be persuaded to pass through this hole and into the vac...OK, they're already coming straight off the blade at warp 6, so that isn't all that hard.  The problem is that you still have a small cloud of fine dust that goes sideways and doesn't get caught in the stream leading into the port at the base of the saw.  I wasted two weeks fiddling with nearly $70 worth of plumbing fittings in an attempt to devise a better port.  I ended up with a lot of contraptions that looked like cobra heads; then decided to return the pipework and take a different tack.

 

As you bone up on your DC lingo, you'll understand that a small (1"? 1.5"?) port at the base of the saw chokes things down to the point that, absent a nuclear powered impeller, you'll never move a sufficient volume air to persuade the fine dust to fall into line and move into the port.  The other solution is to erect some sort of tent or box around the saw as you see here.  Again, the coarse chips are still coming straight back from the blade, so they aren't going to escape.  But now we have a massive area over which the collector can happily move a decent volume of air.  Some fine dust still comes diagonally off the blade, but it's never going to be able to come back out into the room (swimming upstream, in effect) and will eventually be pulled along into the stream.  Kind of neat to watch, actually.  We're used to seeing clouds of fine dust come off the blade, expanding in all directions after making a cut.  With the DC pulling air through a box such as this, however, you see the cloud come off the saw, then seem to hover indecisively for a moment and finally move to the back.  Just what you want.

 

Dust collection seems daunting at first but it's well within your grasp.  Start by reviewing two basic concepts:

  • What volume of air can a given motor move? (measured in cubic feet per minute)
  • How fast is the air moving (measured in feet per minute) in the lines and how fast is it moving at the tool?

Bill Pentz's site is the online bible for this.  Once you understand how these relate, you'll be well on your way to DC nirvana.

Thanks Rob! I guess I was unclear. When I said I had to learn from guys like you, I meant had to learn passively by watching what everyone was doing. Didn't intend for you to actually teach me, but I really appreciate you going above and beyond. 

 

Like the fact that you found it didn't need anything in the front to capture the dust, but that the power of your DC was able to capture it. Makes for a cleaner solution.

  • 2 months later...

Having received a new sliding CMS for Father's Day, I circled back to this thread to get more ideas of how this was put together.

Then, I measured the size of the space needed to give the saw room to slide fully, and miter 45 degrees each way. Wow. 42" x 42" is the footprint to give the saw full range of motion.

 

Have to do some more thinking / planning and see what I can come up with.

Keep us updated on your progress Bob.  DC for my CMS is on my short list, so I'm looking to mooch as many ideas as I can...

I'll try to remember to take pictures of mine tomorrow.  The sides angle in to fit close to the motor on both sides.  The top hangs over a lot and has to have a slot cut out for clearance when it's swung to the right.  The front opening is pretty much minimum size and comes right close to the front of the fence. The opening to the DC is a 1/2" wide slot all the way across the back at the bottom of the box that goes into a plenum which converts to 6" round duct.  I modified the built in sawdust slinger on the Dewalt with a PVC 45 to throw what sawdust it handles down towards the slot along the back. It's just something I cobbled together with scrap plywood years ago to see how it worked, and it works really good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.