Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Antique Stain/Finish on Maple?

Featured Replies

Hi. I stumbled across this site searching for information about how to achieve the look I want for my custom maple kitchen cabinets that I just ordered the wood for. My cabinet maker is unfamiliar with how to counteract the natural pink tones in Maple without painting or going with a dark stain. I would like to know how I can get a light natural off white or pale moss green shade that doesn't hide the grain. Just a hint of color is fine. I'm not sure if it's called pickling or whitewashing but from the can of worms I've been looking it it involves a mind blowing combination of the following: thinner, primer, tinting, staining, toning, conditioners, gels, lacquers, etc. Hopefully I don't need to be a rocket scientist, lol.  I want the shade or tone to be soft, light, fresh, antique, warm and airey because the floors will be dark (don't want too much dark wood to weigh down the kitchen). I chose maple because of it's durable and has a nice even grain so I really don't want to cover up such beautiful (expensive) wood with paint.  What can I do to get this look without having the typical maple pinkish color show through? In advance, I apologize if you've already exhausted this topic in a previous post and I desperately appreciate your help! 

post-14017-0-60896900-1368149946_thumb.j

If the cabinet man is not familiar with the staining process, ask him who he sends out his cabinets to for finishing and get in touch with them. As mentioned above this is a rather simple finish for an accomplished spray man.

  • Author

What a relief. It can be done and is as simple as "adding transparent pigments to the lacquer". That's the most straightforward advice I've seen. Thank you! I'll practice with sample pieces when the wood arrives. The cabinet maker is only making the cabinets, the quote he gave was not to finish them. Sometimes my bargain shopping backfires on me.

You can also go the hand applied route...take some General Finishes "natural" a water based "tint" base (they call it pre-stain conditioner, but is used as a base to make their water-based stains from) and add some General Finishes Milk Paint , now you have a transparent stain. Then apply a good topcoat and glaze over that with a dark color to get the pigments to stick in the crevices for the desired look.

 

Spraying a toned topcoat can be tricky for a novice sprayer.

 

-Ace-

 

EF-Prestain-conditio-250.jpg

The posted photos are pigmented but full hide. Your describing possibly shaded. See if you can find some photos of exactly what you are looking. Doesn't have to be the exact color but the type of finish.

Pigmented is very easy but will hid the grain. Transparent glazes are also easy.

 

Dont mess around with mixing off the shelf stuff. 99% of the time you can just run down and buy what you need tinted to the exact color you want. Kitchen cabinet finishing needs to be done with finishes that will stand the test of time.

 

Don

The posted photos are pigmented but full hide. Your describing possibly shaded. See if you can find some photos of exactly what you are looking. Doesn't have to be the exact color but the type of finish.

Pigmented is very easy but will hid the grain. Transparent glazes are also easy.

 

Dont mess around with mixing off the shelf stuff. 99% of the time you can just run down and buy what you need tinted to the exact color you want. Kitchen cabinet finishing needs to be done with finishes that will stand the test of time.

 

Don

 

dw dani has put the picture as a color reference he said he wants to see the grain.

dw dani has put the picture as a color reference he said he wants to see the grain.

 

The photos are pastels. There is to many different variations of what can be done and still expose the grain. He is describing a shaded finish but with pastels containing titanium white which will not shade. The finish he may be looking for will need a specific application to get the look he is after. Rather than assume based on description its easier to see an example. 

Another possible way is the bleach the maple to eliminate the pink. Then seal with a vinyle sealer and apply a white glaze. Then apply your lacquer and glaze the edges with another colour.

If you choose to go this route or need more explanation, I'll be here.

Not sure about this pink color. Are you building in soft maple? That can be more on the pink"ish" or tan color (no color blind here :) ) Why not send the soft maple back and purchase hard maple, it's white.

 

-Ace-

Color complements will neutralize each other. Red and green are complements. A slight amount of green dye will compensate for the pink. A pigment-based stain will need a grain pattern to lodge the pigment particles. Maple typically has little grain so a dye is more appropriate.

 

-Randy

finewoodfinish.blogspot.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.