Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Metal Garage Shop

Featured Replies

So....new around here, and already need advice.  Like the title says, I have a metal shop and I'm in Arizona.  Now, before you think I'm an idiot for having a metal garage..., the place I'm at came with a metal building.  The building permit was never finalized, and when I tried to get a permit for power, I discovered that was the case and they wouldn't approve it because they say it's now illegal to have it there. That deterred me from scrapping it and building something bigger. So....doing what we would all do....I got my hands dirty and got power to the place.  Last year, I scored a used a/c unit and got it plumbed in, but it's not keeping up.  I don't have any experience with insulation for metal buildings.  Hoping for some advice on metal building insulation.   Here's a pic.

I added wood studs to every 16" o/c metal joint so I can hang things from the wall.

20130221_094700.jpg

Since you've already added the studs, some kind of insulation would go a long way to helping in your situation.  Spray in foam would be best if you can afford it, but any kind of barrier to help prevent heat transfer through the metal surface would be good.

Agreed. Have someone come in and spray insulation. I would first verify that you have all the wiring in place for future needs. Perhaps run a few pieces of conduit with boxes down the center of the ridge in case you ever want some "drop" power. You could easily fish the wires later.

 

With regards to the building department... you stirred the hornets nest on that one! Did they say they were going to make you remove it? I hope that they didn't chalk your lot up for future inspection.... If you ever need work done at your home that requires a permit/inspection, you may have trouble.

You should be able to remedy a unfinished permit by reapplying and paying the fee plus inspection. Unfortunately, lots of times the work is fine, its just about getting money into the municipalities coffers.

 

GL

It looks like bare metal skin on the inside of stud bays, I would add a thin foam board like a 1" between the metal and the batt insulation otherwise condensation will soak the batts and than the enemy mold. condensation is a big problen with metall skinned buildings.

It looks like bare metal skin on the inside of stud bays, I would add a thin foam board like a 1" between the metal and the batt insulation otherwise condensation will soak the batts and than the enemy mold. condensation is a big problen with metall skinned buildings.

 

It sure is!  In mine frost forms on the INSIDE of the roof and then when the sun hits it "rains" on there.  

  • Author

Agreed. Have someone come in and spray insulation. I would first verify that you have all the wiring in place for future needs. Perhaps run a few pieces of conduit with boxes down the center of the ridge in case you ever want some "drop" power. You could easily fish the wires later.

 

With regards to the building department... you stirred the hornets nest on that one! Did they say they were going to make you remove it? I hope that they didn't chalk your lot up for future inspection.... If you ever need work done at your home that requires a permit/inspection, you may have trouble.

You should be able to remedy a unfinished permit by reapplying and paying the fee plus inspection. Unfortunately, lots of times the work is fine, its just about getting money into the municipalities coffers.

 

GL

 

Yeah - I'll take them to court if they like. I went in with money in hand to pay the permit to have a final inspection. There was a permit originally, and partial inspections, but the final was just never done.  Not worried about it, just frustrated at the system.  Good advice on wiring, I'll double check. I think I have circuits already in place.

  • Author

Nice looking shop you have there! Any pictures of projects?

 

Not nice enough yet for project pics, but hope to post as I get better.

Wow, they turned you down with money in hand!!  I would probably give them one more shot, ask to speak with a supervisor or senior inspector, someone that is entrenched in the bureaucracy that may be looking for a promotion ;-)

  • Author

Wow, they turned you down with money in hand!!  I would probably give them one more shot, ask to speak with a supervisor or senior inspector, someone that is entrenched in the bureaucracy that may be looking for a promotion ;-)

 

Only problem now is that I've wired it without a permit.  :)   I'll let it be. Eventually, I'll fight them for a larger shop (I hope).

Not nice enough yet for project pics, but hope to post as I get better.

Not nice enough? Come on now, don't be down on yourself :)

Thinking outside the box ... what if you wrap this building from the outside with insulated materials and cover it. I have no idea about your budget.

Reason for this is that in my living room in Southern California we have this nice ceiling with no insulation and my friend's father in law visited from back East and he said they used to build  a roof on top of a roof and insulate from the top.

 

If you think I am crazy ... you should meet my parents

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.