G S Haydon Posted May 27, 2013 Report Posted May 27, 2013 Don't know about pros or cons but I came across this today http://pinterest.com/pin/453385887456334731/ . Anyone tried it? Quote
Dave's Not Here Posted May 27, 2013 Report Posted May 27, 2013 I'm not sure I see the point of using something like that. Real featherboards are not all that expensive and are made for the job at hand, not scrubbing floors. Quote
DaBear Posted May 27, 2013 Report Posted May 27, 2013 Well, one advantage I see is to give even pressure over a large flat surface when you are doing an operation like shown in the picture. Most featherboards are only the thickness of a board (3/4 or so..).. My 2cents.. 1 Quote
Darren66 Posted May 27, 2013 Report Posted May 27, 2013 Yes, on the woodrat: http://www.woodrat.com/woodrat.html and no I don't have one! Just happened to see a review...from the woodrat site: "To keep the wood against the fence, the 'Rat uses a simple brush, acting as a featherboard, clamped beneath the cutter. This allows variable pressure and no kick back. It's low-tech, b ut it works very well." Quote
tdale51@yahoo.com Posted May 27, 2013 Report Posted May 27, 2013 I could see using them for something that is tapered. Since they're more flexible then a regular featherboard they'll provide consistent contact with the workpiece. Quote
TRBaker Posted May 28, 2013 Report Posted May 28, 2013 I've never seen it before, but I don't see why it wouldn't work. I might try that some time. 1 Quote
woodieboy Posted May 29, 2013 Report Posted May 29, 2013 I haven't used or seen like that. But it looks like a great idea for a large project on the saw / router table. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.