Recommended Posts

Posted

JET Dust Collector DC-1100 708626

 

I saw this in a Craigslist ad for $275. Been up for about a month now, and I was thinking about shooting a low ball offer to the person if they still have it. Maybe $200?

 

Anyone know about this unit?

Posted

that is not a Jet model # "708626" or so old that Jet web site under service, manuals it's no longer listed.

 

If it's been on CL for a month I'm sure other people have called and/or seen it, something is wrong with it or parts missing, I would guess.

 

Have you called? Seen it?

Posted

Typical 1.5 hp dust collector.  If it has the 30 micron filter bag you need to replace that with something better.  If it has the 2 micron cannister filter then you're probably good to go and getting a good deal.

Posted

I've heard good things about a Delta branded one, but I forgot what the model number was. I have also been looking at the Delta model 50-760 on craigslist. Right about the same price range $200-$300.

Posted

$275 is a little pricey to me. $200 would be my max for a used 1.5HP unit.  You know Jet....the price starts a little high to begin with so some of it is the name.  No Production shop leftovers - buy from hobbyists only - much less wear. I would want to hear it run.  A DC doesn't have a lot of moving parts and electronics....it either it works well or something is rattling and going bad and you can hear it.

Posted

$275 is a little pricey to me. $200 would be my max for a used 1.5HP unit. You know Jet....the price starts a little high to begin with so some of it is the name. No Production shop leftovers - buy from hobbyists only - much less wear. I would want to hear it run. A DC doesn't have a lot of moving parts and electronics....it either it works well or something is rattling and going bad and you can hear it.

What about the Delta unit I mentioned? What would be a good price range for that?
Posted

I've talked with my fiance, and we decided that I should really start looking into a dust collector as the next tool. But, I am really not sure about which one I should get. I mentioned a couple used units above, but I have never purchased a used tool before. I am very uneasy about people trying to rip me off with a tool. I need to change that mentality, though.

 

I have a small hobby shop in my basement. I only buy skip planed or rough sawn lumber, so I utilize my jointer and thickness planer every single project. The shavings on those two seem to be endless. But, the final product is always worth it.

 

I have a 2HP hybrid table saw, with a fully enclosed base. Some modifications will need to be made to make it more dust collection friendly, but those are minor gap filling tasks.

 

I have a Festool sander and CT midi, so sanding does not cause an issue with dust. Best investment I have made so far.

 

I was looking into a 1.5HP unit, and at max a 2HP unit for my dust collection. 220V is not a problem. If I need to run another outlet, I will. In a small shop like this, is 2HP extremely beneficial over 1.5HP? Will I see a noticeable difference up front? I will use a single flex hose from machine to machine in the beginning. But, I will later install some more permanent ducting.

 

If I buy new, I was looking at the Grizzly unit James (on here) just purchased, and if I buy used I was looking at some Delta and Jet units on craigslist.

Posted

I've talked with my fiance, and we decided that I should really start looking into a dust collector as the next tool. But, I am really not sure about which one I should get. I mentioned a couple used units above, but I have never purchased a used tool before. I am very uneasy about people trying to rip me off with a tool. I need to change that mentality, though.

 

I have a small hobby shop in my basement. I only buy skip planed or rough sawn lumber, so I utilize my jointer and thickness planer every single project. The shavings on those two seem to be endless. But, the final product is always worth it.

 

I have a 2HP hybrid table saw, with a fully enclosed base. Some modifications will need to be made to make it more dust collection friendly, but those are minor gap filling tasks.

 

I have a Festool sander and CT midi, so sanding does not cause an issue with dust. Best investment I have made so far.

 

I was looking into a 1.5HP unit, and at max a 2HP unit for my dust collection. 220V is not a problem. If I need to run another outlet, I will. In a small shop like this, is 2HP extremely beneficial over 1.5HP? Will I see a noticeable difference up front? I will use a single flex hose from machine to machine in the beginning. But, I will later install some more permanent ducting.

 

If I buy new, I was looking at the Grizzly unit James (on here) just purchased, and if I buy used I was looking at some Delta and Jet units on craigslist.

 

I am really happy with the Grizzly unit that I got. I am also extremely grateful that the wonderful folks on this forum convinced me to get a 2hp unit and helped me do a little rewiring.  Night and day between using a DC vice a Shop Vac. The new ones that you are looking at are pretty well priced so I would just go for new one. 

Posted

I am really happy with the Grizzly unit that I got. I am also extremely grateful that the wonderful folks on this forum convinced me to get a 2hp unit and helped me do a little rewiring.  Night and day between using a DC vice a Shop Vac. The new ones that you are looking at are pretty well priced so I would just go for new one. 

$325 for a brand new 2HP unit does sound really reasonable. I just have to save up some money since I'm all out from buying my recent tools :)

Posted

What about the Delta unit I mentioned? What would be a good price range for that?

I just priced a new Delta model 50-760 with a warranty for $499. $300 is definitely too much.  Rule for used tools is about 1/2 the price of a used one and personally, I discount it even more if it came from a production shop. $200 isn't a bad price and it is a pretty good unit with pretty good power for a small shop.  On craigs list though, there are always a lot of deals on DCs. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined