schdecoy Posted March 2, 2014 Report Posted March 2, 2014 I have both the powermatic with jet chisels and the domino and would not give up either one. Quote
Pwalter5110 Posted March 3, 2014 Report Posted March 3, 2014 I don't know if it is still going on, but powermatic is having a sale on Amazon and I believe the hcm is under 1k Quote
Byrdie Posted March 14, 2014 Report Posted March 14, 2014 I have the Delta add on for the drill press and use it quite a bit. I'd use it more if it were easier to set up, but it was in the budget when I found it and I have a hard time throwing out or replacing a tool that basically works. When the budget expands a bit I'm pretty sure I'll go for something a bit more solid. I find myself using the 3/8" chisel the most. 3/4" lumber, tenon centered on the stock, you do the math. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.