Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Guitar - Staining Maple

Featured Replies

Hi everyone, I'm new on here so please be kind!

 

I want to strip the Gibson Studio front and back in picture one and dye/oil it so it looks like the guitar in picture two, a nice deep oiled look. See Flicker link:

 

http://www.flickr.com/photos/russ1914/sets/72157634263475338/

 

http://www.flickr.com/photos/russ1914/

 

 

My questions are:

 

Once I have taken the nitrocellulose finish off with the appropriate solution/tinner and sanded it, it will be obviously very light in color and need dying before oiling with tung or tru oil. 

 

1) Do I use a pre stain solution to avoid blotching? if so which one?

2) Do I apply a watered down first (lighter) coat of the stain first, sand, build up, sand, final coat?

3) Any suggestions on what color dye to use to achieve the color of picture 2

3) Best oil to use? I dont want a hard gloss finish that I believe Tru-Oil can sometimes give.

 

I haven't attempted anything like this before so many thanks in advance if you can find some time to give my a few pointers on the above issues. And if there are any other tips you may have before I start this project, that would also be greatly appreciated.

 

Many thanks

Kashpost-14211-0-34637500-1372071535_thumb.jpost-14211-0-38256200-1372071598_thumb.j

Is that a studio?  I thought they did not have a maple cap and were all mahogany.

 

 You do realize that you may be devaluing they guitar right?  I think Gibson used a tinted clear to get the colour.  Dyes and stains will look different on different woods, but you may get there with an amber and/or a brownish stain/dye.  Applying light/diluted coats in stages will give you more control over the hue.  A test piece is preferred.   Tung oil is not a very durable finish.  Tru oil is probably better and will not be glossy if you limit the number of coats you put on, or buff it down with steel wool or very fine sandpaper.  

The Studio is still mahogany/maple cap just around 1/8" thinner it's just they don't have fancy maple caps book-matched etc. Early ones were all alder - yours sure looks like it is alder (I may be wrong :) ). Check the serial number against Gibson's online database to find out when it was made. Early 1980s ones were alder but not exclusively. Also does it have plastic binding around the edges or is it just the original finish that has worn?

You could use a oil based gel stain say General Finishes Georgian Cherry or Candlelite. Use Charles Neils Blotch control beforehand. Finish with a suitable oil based matt or semi-gloss top coat but use something a little harder than tung oil. Some luthiers use tung oil for the hand rubbed look but you end up redoing it regularly especially if the guitar has a hard working life.

 

But I agree with Jim DaddyO you could devalue the guitar even though it is at the lower end of affordability. New ones are still reasonably expensive and older ones can fetch 50 to 85% of the new price.

  • Author

Thanks for the advice and replies so far. It's a Gibson Studio Tribute 50's from 2011 with no binding, Honeyburst Satin finish. The Japanese Bacchus in pic number 2 is how all this started, I really long for that guitar (very rare and very expensive and beautifully made), I constantly check on forums and fleebay to find one. For me it's not only how it sounds and plays but more importantly; is the guitar tactile, do you want to pick it up everyday and practice. I do not feel this with the Studio and I know if I get this right and put a lot of work into stripping the whole thing back and creating a great finish I will look at it and just want to play it more and more. Like most things that are not aesthetically pleasing they just get neglected. I don't think I'll devalue it a great deal, Studios continue to drop in price which is weird seeing as they are sonically the same as any Les Paul particularly with a multitude of independent high quality pick-ups to choose from and swap. 

 

Today I got an email back from Melvyn Hiscock and he seems to think that blotching is down to uneven sanding in the prep stage. Anyway I bought a half metre of maple flooring to test and practice on......fun to be had! 

 

I play my dads old no brand acoustic all the time....because it was my dads. I just want to make this Gibson feel more like its my own.

 

Cheers

  • Author

But if I'm re-sanding everything, blotching by any previous card scraping would not come into it?

I am talking more broadly than your guitar. Blotching with Maple cannot be eliminated with perfect sanding. Minimized maybe, but do not bet on perfect sanding. Take the advice of the finishers.

Card scraping is a more uni-directional shaving often leaving more uniform and smooth surfaces than sanding not subject to the same sorts of irregularity patterns. I was using the idea as a contrast to sanding.

  • Author

The clear stain sounds good. I have not come across this idea after far too many hours on forums and emailing the guitar trade.

 

I guess there is no downside. If it works then all is good. If it doesn't work there will be no difference to using the colored dye without the clear stain.

I like Byrdie's solution. That could be because I have dewaxed, super  blond shellac flakes at home.  A light coat of 1/2 lb cut ought to do it.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.