Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Question about a workbench

Featured Replies

 

 

Do you have it so the expansion and contraction of the top moves toward the center?

 

 

Yep, that's how it's designed.  Movement in the slabs has been minimal, though.

  • Author

Yep, that's how it's designed.  Movement in the slabs has been minimal, though.

Believe I have found my bench design that I am going after ;)

 

I have a lot of sketching and planning to do, but a variation of the split top roubo will most likely be my choice. There will be a lot of reading in my future.

 

Do you think 4" x 4" maple is substantial enough for the legs? 

I only have the cost of the vises in this bench. I scored the lumber here and there for free.  It's not a Roubo, that's for sure!

 

Just stock pile the lumber as you can and when you have enough, build what you want.  I will admit tho that I wish I had seen that Roubo before building this one..

 

5ubz.jpg
 

I've been avoiding the Roubo because I need to break it down after every use.  For that reason alone, I've been staying with the concept of sawhorse/ knockdown legs.

 

I have to say, though, that stability has been my primary fear.  (followed by where I'm going to cut the plywood, now that the beans are in.)  If it wasn't for the fact I need to take it apart after every use, I'd go for the full size "traditional," even if I do plan on being a light hybrid (only hand held power tools in my shop, other than the lathe.  No space for anything bigger.)

Could you "cheapen it" by using SYP and some more humble hardware or do you think this bench build would be compromised by doing so?

 

I'm actually toying with this very idea. 

 

We rent right now, and likely will for another 2-3 years. In my current space, I only have room for a bench about 5.5 feet long at the most, and my temp bench I have now likely won't hold up.

 

I considered a smaller Roubo, using SYP like Schwarz talks about in his books, and some cheaper hardware. That way, when we move, if I have more space, I could build a 'lifetime' bench with 'real' wood and better hardware. I'm sure the smaller bench could find a home with someone new to the craft, or perhaps be a bench for one of my sons.

 

And if I don't have more space? Well, I think a Ruobo, even built with SYP, would likely outlive me.

Bob, 

 

By the time a 4 inch slab of SYP is gone, you I and many others will be in another place. I really love the wonderful benches like Eric's split top or Rob Cosman's pimped up to the max bench. That said I also like the fact you can build with more humble timbers and get great results too. FWIW my bench will be pine.

Dang it Graham get to work on that bench already. Enough putzing around with the planes :) I want to see this beast you plan on building.

  • Author

Regarding top thickness, what should I look to achieve? I was thinking 3" of maple should be plenty?

 

As of right now, I am planning to use 8/4 maple for everything. Laminated top obviously, but then to achieve my legs and stretchers, I will laminate two pieces together. I am not sure I can get 16/4 maple from my dealer. If I can, and the price is not too high, I might just go that route.

I'd shoot for 4".  Because 4 is better than 3.  :)  I laminated 8/4 for my legs and chop...no way I'm paying for 16/4 for workbench lumber.

Dang it Graham get to work on that bench already. Enough putzing around with the planes :) I want to see this beast you plan on building.

Dude, I still gota finish my daughters room and built in. I've got the wood  :blink:, the hardware and the tools, now all I need is time................

  • Author

I'd shoot for 4".  Because 4 is better than 3.  :)  I laminated 8/4 for my legs and chop...no way I'm paying for 16/4 for workbench lumber.

Thanks for the confirmation of that. 8/4 it is!

I'd shoot for 4".  Because 4 is better than 3.  :)  I laminated 8/4 for my legs and chop...no way I'm paying for 16/4 for workbench lumber.

To echo this 4 inch seems logical, never built one but they all seem to have 4"ish tops. BTW I'm waiting to see what awesome stuff comes out of this one

Since I've been building my bench for what seems like a year now, I've seen tons of articles and or videos on line of people who came up with very effective and much cheaper hardware than the Benchcrafted stuff. However, I like the benchcrafted stuff for a first build as it has a huge advantage of a great web-page with instructions and support network etc. (Plus the value of Marc's step by step instructions are awesome.)

 

For all you get with Benchcrafted I could argue its a good value. I appreciate the efforts to save money and again there are tons of people out there who've shopped at WW Grainger and McMaster Carr and come up with perfectly good alternatives to Benchcrafted. Of course they had to do the research and figure it all out for themselves.

 

My bench is something of a "FrankenBench". I got nearly all of the lumber for it at no cost. So All I have in the bench are Benchcrafted hardware costs. If memory serves at the time I purchased it Guild members got 100 dollar discount. Geez, that seems like forever ago... "WITH GOD AS MY WITNESS.... I VOW TO FINISH MY BENCH IF IT IS THE LAST THING I DO." (that last part should be imagined with me having just fallen to my knees, arms raised to heaven.)

Dude, I still gota finish my daughters room and built in. I've got the wood  :blink:, the hardware and the tools, now all I need is time................

 

Graham, I feel your pain, brother. I've been working on my bench off and on since the guild build. Pushing hard since October or so. But other projects keep interrupting... Customers, wife, gifts for family... you name it. I feel like I'm getting close but now the boss has requested bedroom furniture for the boy's room. Do I finish the bench and risk irritating the bride? Or do I put the bench aside AGAIN, finish the boy's room and then come back to the bench? ... I think you know the answer.

Yes I do, and "how do you want the boys room to look darling?"

I have the sketch-up drawings on my computer right now. We are working through the design phase.

Your comment made me giggle... thanks.

Dude, I still gota finish my daughters room and built in. I've got the wood  :blink:, the hardware and the tools, now all I need is time................

 

 

Haha i am just giving you a hard time :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.