woodbutcher74 Posted July 14, 2013 Report Posted July 14, 2013 Does anyone know of anybody that makes one? I have been searching the web and found the Porter Cable 121 which is exactly what I am looking for and of course it's discontinued. I would think somebody makes such a thing. Any help would be appreciated. Quote
Dave H Posted July 14, 2013 Report Posted July 14, 2013 Porter cable use to have one.http://www.portercable.com//ProductImages/PC_Graphics/PHOTOS/PORTER-CABLE/TOOLS/LARGE/1/121_1.jpg Quote
Dave H Posted July 15, 2013 Report Posted July 15, 2013 I had some long boards that needed a fancy detail on the ends, I build a small stand for my Ridgid OSS so the height of the sander was the same as my sawhorses it worked slick the stand was made with some scrap ply and short 2x4s I had laying around I just unscrewed the stand when the job was complete put everything back in the scrap bin. Quote
woodbutcher74 Posted July 15, 2013 Author Report Posted July 15, 2013 Thanks, but that's the one that is discontinued. Maybe somebodies got one that they don't use or need. I'd consider buying it if it's in good shape. Quote
wdwerker Posted July 15, 2013 Report Posted July 15, 2013 I have used my Ridgid OSS on long pieces by screwing it to a rolling stand and clamping the board between 2 benches. Takes a bit of rigging at first but it works well and cleans up rough cuts fairly square. Hooking up the shop vac to the sander helps with the dust. I sanded the rounded corner of a countertop by nailing together some scraps into boxes the height of the Ridgid to support the counter and then just slid the sander along under it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.