Popular Post pghmyn Posted July 19, 2013 Popular Post Report Posted July 19, 2013 I'm sure most of you all know what Habitat for Humanity is, and what they generally do. My mom works with someone who qualified for a home through this initiative. They have been working on her home for a few weeks now, and asked me if I wanted to participate. I am glad I did. If you are not familiar with how someone qualifies for a house, it is quite a lengthy process. You must meet many requirements of income, stability, etc. Also, it is not just a put your name in and draw type of deal. There are interviewing procedures that must be completed, and so on. It is a thorough process, and they do their best to choose suitable candidates. In the Milwaukee are, just like any large city, we have our "run-down", "run-through", and "run-over" areas. It's just the reality we face. This main project in Milwaukee is neighborhood revitalization. The city has certain lots where houses are torn down, and then sold to HFH for I believe $1.00. With promise of developing a new home and so forth. The house is not just given away, the new owner must be able to cover mortgage costs, but no where near what a typical new home would cost. I think my mom's friend is going to pay $500-$550 a month for a brand new two story three bedroom home. Anyway, no construction experience is necessary. If you can swing a hammer, you are set. I got there and the joists of the second floor were just being finished. So, a project leader took me and another up top to lay the OSB flooring. While people below pushed up sheets as needed, we worked away gluing and nailing these all down. I wish I had a better hammer for this work. The claw hammer they provided was getting hard to swing after about the 500th nail. Soon, there were 8 people up on the second floor nailing the sheets into place, and before you know it, the second story had a floor in under 2 hours time. Working in 95 degree heat, I'm glad I know how to pace myself with physical labor. If you ever get the chance, I recommend giving this program a shot. It helps so many people, and gives a feeling of satisfaction that is unimaginable. I will try to get back on site next week after my work week is over. On a side note, and a somewhat funny bit, I did not notice a glob of construction adhesive on the ground as I knelt down right into it at one point. See now, I did not even notice I knelt into it when I did! I did however notice when it began to harden quite a bit and my knee hair was being pulled as I started to move. This stuff is so strong, it ripped off my hair, and skin below it. A good 1.25" diameter circle in the center of my knee. I unintentionally left a part of me there today. 4 Quote
EdgewaterWW Posted July 19, 2013 Report Posted July 19, 2013 Thanks for posting and Volunteering! Volunteering for Habitat for Humanity is great. I got to work on the 200th home in Denver. Since I'm a "skilled volunteer" I bring all my own hand tools with tool belt and get assigned the fun jobs and run the saws. Also teach people how to read a tape or hit a nail, etc. Volunteering it fun, get a tan, teach people and rewarding (a few times worked hand and hand with the family getting the house) (to add the candidates must work 100 hours on their house or other homes.) 1 Quote
pghmyn Posted July 19, 2013 Author Report Posted July 19, 2013 Thanks for posting and Volunteering! Volunteering for Habitat for Humanity is great. I got to work on the 200th home in Denver. Since I'm a "skilled volunteer" I bring all my own hand tools with tool belt and get assigned the fun jobs and run the saws. Also teach people how to read a tape or hit a nail, etc. Volunteering it fun, get a tan, teach people and rewarding (a few times worked hand and hand with the family getting the house) (to add the candidates must work 100 hours on their house or other homes.) I plan on volunteering some more in the future, and that is something that I would like to look more into it the "skilled volunteer" area. I know they have to assume I have never lifted a hammer before, but I would like to really give them what I am capable of doing. Quote
G S Haydon Posted July 19, 2013 Report Posted July 19, 2013 Awesome work guys. The first I got to hear about this concept was on an episode of Dexter!... We might have something like this in the UK but if we do it's not promoted very well at all. On a selfish note it's a great way to learn about construction carpentry and give something back. Win Win is the term I think. And pghmyn, want a better claw hammer, one name, Estwing. My personal fave. 1 Quote
pghmyn Posted July 19, 2013 Author Report Posted July 19, 2013 Awesome work guys. The first I got to hear about this concept was on an episode of Dexter!... We might have something like this in the UK but if we do it's not promoted very well at all. On a selfish note it's a great way to learn about construction carpentry and give something back. Win Win is the term I think. And pghmyn, want a better claw hammer, one name, Estwing. My personal fave. If I become more involved in the work, I think that I might invest in a nicer hammer for myself Will come in handy down the road when I build my own house. Which has been my dream since I was little. 1 Quote
wdwerker Posted July 20, 2013 Report Posted July 20, 2013 I had a bit of a different experience with Habitat. They contacted me about modifiying a bunch of donated custom cabinets to fit the Habitat House already under construction. I met the couple and found out how much work they had done to qualify. The Habitat people said not to include a space for a dishwasher , they did not put dishwashers in Habitat homes! The family with 3 kids had a relative that was going to give them a dishwasher for Christmas. I had to chop down a cabinet to 24" wide and install it to be easily removable after the house was finished so the dishwasher could be installed. The plumber agreed with me and stubbed in the pipes, claimed that was just the way he always did kitchen sinks. The Habitat people wanted me to provide an invoice for the retail cost of my services to be added to the bill the couple was going to have to pay for the home. So in essence my donation wasn't to the couple but to Habitat itself. I just charged for materials and gas. I am not a very religious sort of guy and every time I turned around they wanted everybody to stop and pray together. That got old real quick. I am a big believer in freedom of religion, I want freedom from everyone else's religion ! I won't interfere with your religion as long as you keep it to yourself, is that too much to ask? Quote
EdgewaterWW Posted July 20, 2013 Report Posted July 20, 2013 "construction carpentry" HaHa, after 3-4 years of doing that I just call it "construction". GS now you know why I use Dewalt tools from my construction and DIY background. So i'm going the other way from construction to woodworking with DIY and woodturning in the middle. Pghmyn, the way I got to do "skilled volunteering" is I take my tools to volunteer day, keep the tools in the truck, sign-in, find the person with the nice tool belt and hard hat on ("the super" ie superintendent) and say "I got my own tools can I use them" they reply "yes but no power tools" remember this persons name and use it next time. They see the tools you got or talk to you about your background and your in (better jobs, power tools or lead a few people). a Tip take real construction hand tools, ie under 20 oz hammer is a toy, speed square, utility knife, small level. chalk line, 25 ft tape, craw or wonder bar, etc. My fav hammer for framing is a Vaughan California Framer 27 oz,, also made in a 23 oz and a 19 oz (for hanging picture frames, lol) If FESTOOL made hammers this would be it http://www.amazon.com/Stiletto-TB15MC-15-Ounce-Titanium-Milled-Face/dp/B00079R1YM Quote
G S Haydon Posted July 20, 2013 Report Posted July 20, 2013 "construction carpentry" HaHa, after 3-4 years of doing that I just call it "construction". GS now you know why I use Dewalt tools from my construction and DIY background. So i'm going the other way from construction to woodworking with DIY and woodturning in the middle. My fav hammer for framing is a Vaughan California Framer 27 oz,, also made in a 23 oz and a 19 oz (for hanging picture frames, lol) If FESTOOL made hammers this would be it http://www.amazon.com/Stiletto-TB15MC-15-Ounce-Titanium-Milled-Face/dp/B00079R1YM Doug, I hear you on the DeWalt point. Although I "like" my makita stuff my job tools get a hard life so I often don't spend loads on tools. I have a lumpy AEG drill driver which came with a jigsaw, only £100.00 so I don't stress if it's getting wet or being treated badly. I think construction is a great start point for woodworking. Quote
CT Proctor Posted July 24, 2013 Report Posted July 24, 2013 Since you volunteered your time for Habitat, I'll do something for you. I work for a vocational textbook publishing company. We publish textbooks that are used by the UBC, IBEW, UA, and vocational schools to teach the building trades. If you PM me an address, I will send you a copy of the new edition of our Carpentry textbook (just came out last month) which is used by the UBC and others to teach carpentry. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.