Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cherry Bed for a small bedroom

Featured Replies

We had a small bedroom to fill and started looking for what was called a storage bed or farm bed taking advantage of the space under the mattress for storage.  After looking at bedroom sets and being disappointed in the use of woods, stains, and construction I decided to build my own.

The ones I saw used three drawers on each side but I decided to put two on the side and two at the foot of the bed.  I made them for maximum depth which turned out to be 28 inches.  Using full extension hardware meant we would have full access to the drawers.

Fortunately, I had a lot of cherry 1/2" x 6" baseboard that was left over from building my house.  It had been around for years and I knew that most likely it would never get used.  So, set out to make a bed.

I hadn't done furniture making in years.  Most of my projects were either in construction where tolerances were not as important so my first task was to tune up all my tools including the Delta Unisaw, Makita planer jointer, chop saw and sanders. I had the planer and jointer blades sharpened and pulled out my special reserve rip and crosscut blades.

Then I set out to build the bed and two end tables.  I first rough sketched out my plans. The first was a headboard which involved purchasing some 3x3 cherry (ouch) for the posts.  The panels I laminated and glued up from the baseboard. The pictures below show the main construction including assembly of the headboard, assembly of the basic outer frame, assembly of the inner drawer and bed supporting framewood and then the assembly of the two end tables.

 

When finished I completely dissassembled it and spray painted the components and drawers with flat finish polyurethane enamel.   Finally, I moved it to reassemble it, tuning the door fronts and drawers.  The drawers have self-closing full extension hardware.

 

IMG_0831.JPG

I built a similar footboard and moved on to make the sides and assemble it into a frame.IMG_0832.JPGIMG_0834-1.JPGIMG_0860.JPGIMG_0880.JPGIMG_0886.JPG

  • Author

Thank you for the response.  The last two days I packed up my skill saw, beam saw and carpenters tools and it was of to volunteer at Mt. Pisgah, cutting and installing cross bracing that will lie below the deck.  If you want to see more, look at my post on Mt. Pisgah Bridge.

 

Jim

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.