rodger. Posted September 13, 2013 Report Posted September 13, 2013 I know there are a lot of photo and video guys on here, so I am seeking some help. I have had a few requests for custom furniture pieces (mostly cutting boards, photo and tile framing, and tables) and thought maybe of starting a Facebook page so I would not have to email so many photos all the time. My photos are usually subpar, and are taken with my iPad. I have a nikkon d90, with an external flash and a reflector. The problem is I don't really know how to shoot photos of furniture. Anyone care to share some tips? Quote
CessnaPilotBarry Posted September 13, 2013 Report Posted September 13, 2013 You and me both... Thanks for starting this thread! Quote
bgreenb Posted September 13, 2013 Report Posted September 13, 2013 This fine woodworking article was really helpful to me. Subscription required, but it's worth downloading if you can. http://www.finewoodworking.com/how-to/article/a-woodworker’s-guide-to-photography.aspx Quote
bgreenb Posted September 13, 2013 Report Posted September 13, 2013 Sorry, the link didn't come through at first for some reason: http://www.finewoodworking.com/how-to/article/a-woodworker’s-guide-to-photography.aspx Quote
ottacat Posted September 13, 2013 Report Posted September 13, 2013 Furniture can be remarkably difficult to photograph. For example a table top that is semi-gloss will typically go so bright that the photo loses all the character of the wood in the top. If you lower the exposure to show the top properly then the rest gets underexposed. The essence of the FWW article referenced above is to photograph furniture essentially the same way you do portraits of people. The article shows to use a good camera and a proper lighting setup to control and distribute light to best show off the furniture. This means setting the furniture up against a proper background and then having at least a main light on one side and a fill light on the other. I've also had good results taking photos of furniture outside on a heavy overcast day. The overcast light is nice and even and shows off furniture quite well. Choose a good background. I used a pile of firewood on my last shot. On my last piece I had a lot of trouble showing the character of the birds-eye maple top without underexposing the whole piece. I ended up putting the camera on a tripod and shooting three shots - one at the normal exposure, a second two stops underexposed and a third two stops overexposed. Then I used a feature of photoshop to combine them in a very natural looking HDR image that very accurately resembled what I was seeing. I've used HDR in my photography before and it is easy to have such photos come out very artificial looking. I found most dedicated HDR programs hard to work with to get a natural look. For some reason the default photoshop settings produced a very natural looking result. Quote
dcustoms Posted September 13, 2013 Report Posted September 13, 2013 This thread has CTProctor written all over it! Hopefully he will chime in... Quote
CT Proctor Posted September 13, 2013 Report Posted September 13, 2013 There's not really anything special about shooting furniture. First thing is to watch your backgrounds, don't shoot in a cluttered space with a lot of junk in the background. Get a roll of continuous paper or set up a sheet to shoot against. Clean backgrounds really go a long way in making your pics look better. Shoot tight, this means having the piece of furniture fill the frame as much as possible. You can always crop a little tighter in Photoshop if you need to. If you don't have Photoshop, download The Gimp which is a very good and totally free image editor. Use your d90 and external flash, bounce the flash off the ceiling or a wall behind you. This will give you a softer more diffused light. You can always pick up a few clamp lights and use those too. Make sure you get daylight bulbs. Let me know if you have any specific questions. 1 Quote
rodger. Posted September 13, 2013 Author Report Posted September 13, 2013 There's not really anything special about shooting furniture. First thing is to watch your backgrounds, don't shoot in a cluttered space with a lot of junk in the background. Get a roll of continuous paper or set up a sheet to shoot against. Clean backgrounds really go a long way in making your pics look better. Shoot tight, this means having the piece of furniture fill the frame as much as possible. You can always crop a little tighter in Photoshop if you need to. If you don't have Photoshop, download The Gimp which is a very good and totally free image editor. Use your d90 and external flash, bounce the flash off the ceiling or a wall behind you. This will give you a softer more diffused light. You can always pick up a few clamp lights and use those too. Make sure you get daylight bulbs. Let me know if you have any specific questions. Thanks for the help. Where should I place the shop lights? Should they be in front, behind? Quote
Tpt life Posted September 13, 2013 Report Posted September 13, 2013 Outside, cloudy days are perfect, early morning or late evening can be made to work. This makes for the least investment in lights, the least artificial glare, the truest color renderings, and little reliance on proper flash technique. You'll get better pics faster and then can amp up your game as you gain experience. Pay for the first round if you decide to go for lights. Watch the pro you hire and log every move. Then examine every shot selection for what makes it appeal to you. Imitate but do not try to copy (chase your tail.) when you have stopped learning your camera and gotten a few projects under your belt, enroll in a basic photography/composition class at your local community college or state school. As a hobby photographer it will likely be the most enjoyable experience, especially if you can connect with some other learners to leech off their triumphs and mistakes. Quote
rodger. Posted September 13, 2013 Author Report Posted September 13, 2013 Outside, cloudy days are perfect, early morning or late evening can be made to work. This makes for the least investment in lights, the least artificial glare, the truest color renderings, and little reliance on proper flash technique. You'll get better pics faster and then can amp up your game as you gain experience. Pay for the first round if you decide to go for lights. Watch the pro you hire and log every move. Then examine every shot selection for what makes it appeal to you. Imitate but do not try to copy (chase your tail.) when you have stopped learning your camera and gotten a few projects under your belt, enroll in a basic photography/composition class at your local community college or state school. As a hobby photographer it will likely be the most enjoyable experience, especially if you can connect with some other learners to leech off their triumphs and mistakes. I appreciate your advice and knowledge, but I was kinda looking for a "quick and easy" approach. I am not really interested in taking a photography class, as I would rather spend my time in the shop. Quote
CT Proctor Posted September 13, 2013 Report Posted September 13, 2013 Thanks for the help. Where should I place the shop lights? Should they be in front, behind? Depends on what your wanting to shoot, if its a small piece I would use a light tent. Google it, they are easy to make and work well. If it was a big piece of furniture, I would use three studio strobes. Two would be in front at about a 45 degree angle off the corners and a third would be on the background (behind or under the piece so it can't be seen). Put the piece of furniture about 5-6 feet from the background, that way you won't have to worry about shadows on it. Take a test shot, if its too bright either close your lens down, which means a larger f stop number, lower your ISO, or move the lights back some. Sometimes it takes a combination of the three. 1 Quote
bobcrosley Posted September 14, 2013 Report Posted September 14, 2013 Good advice here. I like this article, too. http://www.nealaddy.org/node/16 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.