Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Safety reminder

Featured Replies

  • Popular Post

Tonight I almost had an accident.

I was template routing, specifically a custom baseplate (an operation I have completed a hundred times). I had the baseplate screwed to the template, and I was using a guided bearing bit. I was routing in the proper direction, but the material grabbed funny as I moved around a corner, and the piece pulled into the spinning bit, pulling my hand with it.

My hands were well clear of the bit when doing the work, but they came too close for comfort when that workpiece grabbed. I was uninjured, but I took a step back and reflected for a few minutes.

Be aware, and be safe.

-pug

Need some clean drawers? That is scary isn't it. I always take close calls as a warning to use guards, clamps and safety gear whenever possible. I approach any cutting situation with an exit plan. If the tool grabs I am going to let go and step this way because the wood might go that way.... That sort of plan.

Glad you are OK.

good to hear safe , Dremels can be dangerous also had a bit I thought was all the way in but it was not and shot out like a gun , careful of this ....

I'll add when you pattern route the max depth of cut should be 25% of the cutter diameter. Anything over can grab when the grain changes direction. This does not mean to hold the piece out and work your way in, it means cut closer to the line.

 

Some food for thought. This is where the majority of shaper accidents happen. Some guys were taught 50% of the cutter diameter. Even at 25% of a 4" cutter thats an inch of wood pulling your hand into the stump grinder. Stay under 25% its nearly impossible for this to happen.

 

One more rant. :) Starter pins were invented for a reason, use them.

All good discussion. Thanks for posting this, Pug. 

 

I too have routed too small of a piece without a clamp.

 

I too have boasted that the Table Saw "is not inherently dangerous."

 

Working safetly needs to be the woodworker's chief preoccupation.

 

 

miw

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.