Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Turning oak as dark as possible.

Featured Replies

I recently got a job from a friend to make a bench seat for her kitchen table. just a simple 2x2 legs, 1x3 rails, 3/4"  16x46" seat. mortise and tenon'd rails into the legs. Just a few hour project.

The problem being, her table is painted stained almost black,  looks almost painted. 

What would be the simplest way to get get that dark with some stain. 

Or dye, or what ever. not paint though. I've built a reputation for refusing to paint wood, so I gotta stick to that.

Thanks.

==> her table is painted stained almost black,  looks almost painted.

 

When you say 'painted stained almost black' does that mean: it's black w/ slight purple cast (most black dyes), jet black (India Ink) with less than 100% opacity, really really deep brown (drown dye with India Ink added)...  Is it painted black? A picture would help...

  • Author

What I mean by "painted stained" is stained. I apparently typed painted and didn't see it so disregard.   Its defiantly stained, you can clearly see the depth in the black and the grain shows through. its just much darker than what i have achieved in the past with ebony stain. (the darkest I've used) I've never used any dye's so I wonder'd if you can get darker with them or do i just suck it up and put on multiple coats of a stain. 

I don't have a picture sadly. I've repaired the table before. so im going from memory on the color situation.

  • Author

Apparently this India ink stuff you all are talking about is the way to go. so I'll find some and figure that out.

 

Thanks.

Black lacquer thin 20:1 1 being the lacquer mist on with no build. The black will look like a stain. Shoot clear over the top. The grain will show and telegraph through the clear. The key to black is lamp black.

==> India ink stuff you all are talking about is the way to go

 

PB's approach is certainly more robust... Tinted lacquers, polys, etc are really a great solution to the problem -- assuming you can spray.

==> When you apply india ink, do you use full strength or mix with a solvent of some sort?  It seems you would have to use a lot of the stuff to do a large surface. 

 

first step -- finish-prep some oak scraps to practice on...

 

second step -- I think there is a YouTube video of Charles Niel using adding 1oz India per 8oz GF Black Dye -- check it out...

 

third step -- practice, practice, practice prior to your final project...  The thing about oak -- it's really hard to fix if you screw the pooch...

Using colored solvent lacquer is to get your hands on the color. 844 colorant is lamp black. It take almost a pint to color a full gallon of clear lacquer. That pint would take about 100 bottles of India ink to get the equivalent amount of lamp black. Nine times out of ten the supplier will color the lacquer for free. For the cost of a gallon about $22 if you don't spray black lacquer you end up with a big supply of black for next to nothing.

You can also make your own by mixing 844 colorant, ethylene glycol (lacquer retarder) and a touch of shellac or lacquer. But it would be fairly expensive.

I am also in the India ink camp. I am sure black lacquer is also a great choice, but I have never used it myself.

I have a picture of a table I did using India ink. It turned out really nicely. It did take a couple bottles of India ink, but all in all the stuff is cheap.

I use it full strength, just applying with a foam brush. Put on 2 coats that dry pretty fast. You would actually be amazed how far it spreads. You cover a lot of surface area with an 8 ounce bottle.

When you apply india ink, do you use full strength or mix with a solvent of some sort?  It seems you would have to use a lot of the stuff to do a large surface. 

 

I normally use it straight up, with a foam brush, overcoated with a suitable clear coat.   Larger quantities are easier to get at places like Dick Blick or Jerry's Artorama.  It's very thin, and it turns the wood black immediately.

 

http://www.dickblick.com/products/blick-black-cat-waterproof-india-ink/

 

There are black stains, like Solar Lux, but they often have a bluish-purple cast, not truly black.   The "Lamp Black" colored pigment, as mentioned by PB, is named after the soot on an oil lamp.

I think there are also different types of India ink. IIRC speedball brand has shellac as the binder some of the others have no binder. I don't know which would be best.

This is what can be had with one ounce of black lacquer and a clear top coat.

Pb, looking at the background of your pictures, I think you should give us a shop tour. Lol. It looks like you have a really nice setup, and the cabinet looks really nice!

Highlander, I forgot about that trick with oak. It doesn't work well on woods with low tanin levels, but oak does get black.

You just have to put steel wool in a glass container and fill with vinegar. Let it sit for a couple of days and brig it onto the oak.

.

 

As an alternative to paint.......................

 

 

The traditional way, used for centuries, of rapidly darkening Oak is to 'Fume' it.

 

It involves exposing the entire finished piece to Ammonia fumes. 

The depth of colour is established by experiment; it depends on the tannin content of the wood, the solution strength of the Ammonia and the length of exposure.

 

Not  for the faint-hearted, but it is capable of producing permanent colours from light brown to deep Sienna with a minimum of work.

 

If you search antique furniture-making technques, you'll find out the process.

 

 

All best

  • Author

I went to wood craft and got some General Finishes Ebony Dye Stain, and tried it out on a scrap piece. it seems to be getting me damn close. I'm thinking 2 coats of that is going to get me there.   The nice thing about going black is, it cant be too dark. so I may end up adding some ink to that. The ebony stain left me a little grey, but I haven't cleared over it yet, and that'll change things.

 

For anyone that was wondering, Home Depot does not tint lacquer. They will however, try, with their paint machine, and ruin a gallon of lacquer, then give you said concoction for free.

 

I thank you all for your help and suggestions. I'll be sure to post what I end up with.

==> I may end up adding some ink to that

 

India ink will drop-out the slight cast...

 

One thing, put a top cote on your scrap to see the final tone... 

  • Author

Sadly, I used to work there, in hardware. it was rather eye opening, in terms of what they call experts.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.