Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Would any of these be a worthy next purchase?

Featured Replies

I've saved up a little bit of money ($200 give or take a couple of bucks) to buy another tool. I'm wondering if any of the things I'm considering are worth spending it on.

1. a Chris Vesper brass 7" try square. I have a Starrett 12" combination square and a tiny Matsui (IIRC) metal try square. The fact that his are calibrated so precisely appeals to me.

2. an LV/Wenzloff or LN cross cut panel saw. My only non-back saw for cross cuts is a 26" Disston D8.

3. save up a little more and get a Bad Axe 16" hybrid filed tenon saw to go with my 12" hybrid filed DT/carcass saw (I know there are cheaper saws than BA but I'm addicted to them lol)

4. a water stone higher than the 6,000 grit King water stone that is my current finest

5. a block plane (LV DX60) - I currently use a little 48mm kanna that seems to work pretty well in this role.

So, one of these options, something else, or none of the above. What would be the wisest tool investment?

Geez Tony, I'm sick of reading your threads twice :P I just answered this post on "the other" forum. See that forum for my response.

 

(only teasing you, of course. I do the same thing)

  • Author

Yeah, there's a slightly different crowd on each one so I try to ask the questions on the forums that makes sense to do it on.  I love each forum and each has it's strength and weaknesses.  This one doesn't have as much traffic but also avoids some of the more brutal participants ;)

My advice would be a finer stone, and a rip filed backsaw of some type-I think I didn't see one listed-I don't know what a "hybrid" filed saw is, but probably wouldn't have a use for one anyway.

Yeah, there's a slightly different crowd on each one so I try to ask the questions on the forums that makes sense to do it on.  I love each forum and each has it's strength and weaknesses.  This one doesn't have as much traffic but also avoids some of the more brutal participants ;)

Hehe. I hear ya. Very different crowds indeed.

A hybrid filed saw is just saw that is filed with rake that's a little bit more relaxed that a rip filed saw and some fleam, but not as much as a dedicated xcut.  I was very skeptical of this concept at first, but its pretty amazing how well a saw can do at both with the right filing. Softwoods is where the fleam of a dedicated crosscut makes the most difference. In north american hardwoods you can relax the rake just a bit and just add few degrees of fleam and get a nice xcut without slowing down the ripping ability hardly at all.

 

My most used back saw is a 14" saw that I made and keep filed hybrid. I've messed with a few different combinations but for my use and the woods I use (mostly cherry, maple, and walnut) found that 10 degrees of rake, 10 degrees of fleam, and 10 degrees of slope give me a saw that rips quickly and crosscuts smoothly. Of course, YMMV. 

Glad it works for you.  I'm pretty sure that would be too slow and frustrating for me ripping those woods, or any other wood.

Tony all those tools would be awesome to own. I just know I will push the button on a premium tool one of these days and love it. That said if I had $200.00 to spend I would want my money to go quite far but that's just a personal choice of course.

I find it almost impossible to advise really but out of that list I would be drawn to the block plane, that said mine cost about £7.00........

BTW I'm glad to hear it's not brutal here, I find that kind of thing very off putting.

  • Author

Me too :)

 

It seems a shame that folks that make their living working wood can't/won't spend as money on tools as amateurs.  That said I've been waiting since I was a teenager to have the time and space to do it so I'm going to enjoy fully now that I'm broken down and retiring soon ;)

 

I was leaning towards the back saw.  However, the block plane certainly has it's charms as well.  I could get the LN low angle for about half the price of the DX (and 1/3 the NX).  I could still get a pretty good ceramic 8k to 10K sharpening stone (or some thing else)

It's a hard one Tony, In my line of work these premium tools would be annihilated in no time and the investment would be ruined. Almost like taking a Ferrari across a field. I'm also not a high end cabinet maker, my tools are often used in harsh conditions on the job site. However my hobby tools are a different matter, they will never  :lol: be used as harshly as my day job tools and I hope to add a few special ones to that collection when the opportunity presents itself. (see day job tools below)

 

post-11619-0-50960700-1380581361_thumb.j

 

On as side note I'm delighted to see STANLEY offering better quality tools these days and I hope they continue to expand the sweetheart range. I often find myself taking a little look at what they have.

Sash filing is the way to go. Cuts great on rip and cross cut.

I would put the stone on the top of the list, going to the higher grit changes everything. I use oil stones so when I bought my translucent stone it brought my love of handtools even higher. After that I would say whatever is holding you back the most on your projects or personal goals. No matter what you cant go wrong with your choices 

Nate

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.