Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

First Hand Plane - Chipped Wenge Sole

Featured Replies

Hi Everyone,

 

I just finished my first hand plane.  Well, almost first.  I took a class and built a simple one there.  This was the first one in my own shop.

 

The body is cherry; and the sole, wedge, and cross pin are all wenge.  I had a little problem with the wenge sole.  I chipped the corner of the mouth the first time I inserted the iron.  Am I missing something on how to work with wenge.  It seemed really easy to pull up fibers on it and give yourself trouble.

 

It is meant to be a block plane.  So I think it is still usable.

 

For finish, I put a couple of coats of Danish oil on it.  Seems like a lot of people wax their planes, also.  Should I put a coat of Johnson's paste was on it?  Any other finishing recommendations?

 

I have a hock iron and chipper in it.

 

The instructions and pattern I used were here: http://www.popularmechanics.com/home/how-to-plans/woodworking/1273456 .

post-5347-0-86740700-1382407470_thumb.jp

post-5347-0-36168800-1382407479_thumb.jp

Re, that looks great. Did you save the chip that came out? If so, you might try gluing it back on with epoxy. If not, you could try to fill the void with epoxy or inlay another chunk of wenge in it.

Nice work!!!  +1 on TRBaker's ideas for filling in the chip.  With the hock iron&chipper, I am sure it will perform just as good as it looks, if not better!

I've had this happen twice recently.  I glue the piece back in or fill it with epoxy like TRBaker said.

 

I use Johnson's wax on mine too. 

Here is the most recent one this happened on.  Filled with epoxy and all is good. 

 

XUpHF2Ql.jpg

Can't tell from the photos, but is it the leading edge or the trailing edge?  If it's the latter, I'd be inclined to leave it alone.

  • Author

Hi Tom,  Thank you very much for the offer, but it isn't necessary for this project.  

 

I'm planning my next plane, and I might add something in front of the mouth for it.  Boxwood is good for that, I guess? 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.