Pbmaster11 Posted November 3, 2013 Report Posted November 3, 2013 http://southbend.craigslist.org/tls/4165201999.html My buddy is looking at getting some tools and I came across this on CL for him... thoughts? I thought the prices were decent as long as the table saw table can be sanded out and refinished.. Quote
rodger. Posted November 3, 2013 Report Posted November 3, 2013 Looks like surface rust to me. You need to get a closer look to ensure no pitting of the cast iron. If it's only surface rust, some 0000 steel wool and wd40 will clean it up nicely. Of course, there are lots of other things to check. Make yourself a list of things to check, including the fence, mitre gauge, motor, belt, arbour (if you use a dado stack), switch, crown guard, etc. Good luck! Quote
..Kev Posted November 3, 2013 Report Posted November 3, 2013 I think there is some haggle room on the MS. Not sure about the TS but, if Franklin is correct, that looks like a good deal. Quote
Tpt life Posted November 3, 2013 Report Posted November 3, 2013 I'd bite. Where are you PB? Niles is a hop down the road from me. Quote
mkrusen Posted November 4, 2013 Report Posted November 4, 2013 C Shaffer, he posted this thread for me. I figured I'd make an account for when I'll certainly need everyone's advice on some other question I may have. I'm in South Bend. Just started a PhD program at ND so I'll be here for 5-7 years. Quote
Tpt life Posted November 4, 2013 Report Posted November 4, 2013 Welcome to the forum. I am in Elkhart semi permanently. This is a good region for old cabinet shop tooling as they are a dime a dozen for the RV industry. You'll see some really great stuff on South Bend and also Ft Wayne CL as the old shops are spread out through Middlebury and Lagrange as well as across the line in Michigan. Happy hunting! PS. Go with cash and "negotiate" the condition issues. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.