Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Haul

Featured Replies

Biggest lumber purchase I have made to this date, quantity of BF and cost.

 

I chose all shorts, under 4ft, for all the basic parts. They are at the #1 common price, even though they are all defect free. Saves me $1.03 per BF. Well, I did grab one #1 common full size board on the way out. There was one really nice looking piece sitting on the top of the stack and I couldn't pass it up :)

 

For building my two end tables, this haul was more than enough. And hit the bank at a whopping total of just over $100.

 

What really hit me was the leg stock. I looked and could not find any long enough pieces of 8/4 in the shorts area. Bummer, so I had to go look at the full length stuff. No way do I need a 9" x 8' piece of 8/4 cherry. That would have cost me a fortune. So, I looked at the 6/4 stock and found a piece that was enough for 4 tables (16 legs, if you're counting ;) ). It was a heavy 6/4, and I mean heavy. The heaviest in the stack :) I would be suprised if I couldn't finish milling them to 1.5"...which is what I wanted in the first place. Worst case scenario, they will probably end up 1.375" x 1.375"

 

I bought a piece of 6/4 poplar for the drawer sides, and solid poplar bottoms. I didn't want to buy 4/4, and mill off half of what I buy. What a waste. I couldn't resaw the 4/4 because then the stuff would be too thin. The 6/4 leaves me enough to prep, resaw, and finish off to final thickness at 0.375" - 0.5" (whatever I decide looks better).

 

C5B34DF2-C046-4CE4-A3E6-4D50D1B37FEE-434

Nice Sam! The best part about shorts is that they are usually about 1/2 the price per BF. They are a great solution for those of us with 6" jointers!

  • Author

Nice Sam! The best part about shorts is that they are usually about 1/2 the price per BF. They are a great solution for those of us with 6" jointers!

For me, the shorts are sold at the #1 Common price. I really like the way the have it set up. Several bins of shorts ranging from about 10" - 30" and a bin for just 48" pieces. Not all species over there, but suits me quite well!

The price is roughly, as you said, half the price of a select & better board. Even though all the boards I picked have at least one fully defect free face. Beautiful grain, too. I did a quick pass on the jointer for my boards. Not a full face joint, but enough to open up a fresh face just a little bit.

That 6/4 board killed me at $41, though. Ouch.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.