Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Po' Boy's track saw

Featured Replies

I saw a post on another forums where someone showed their poor boy version of a track saw, but it used aluminum extrusions which seemed pretty fancy to me.  I stuck this one together over ten years ago, and it still cuts a straight line.  This cut was 19'3" long, and the new floorboard fit right up against the cut without messing with it any more. 

 

It's about as po' boy/redneck as you can get-just an 8' piece of 1/4" luan plywood, with a factory edge of MDF glued to it, and cut to fit with the circular saw used on it.  I also have a fancier, short one for cutting door bottoms made from 1/4" Birch and Yellow Pine that's over 20 years old.  I'm sure I made them before commercial track saws came out.

 

Dust collection is with a Shop Vac hand held by a helper during the cut, which gets a surprising amount of the thrown sawdust.  In most of the houses I work on, sawdust having to be swept off the floor is actually a good thing.

 

http://www.historic-house-restoration.com/images/ElamsHouse_Oct._2012_025.JPG

I have used one like that for many years myself. Still thinking about a 75 track saw but my biggest obstacle is that I want at least a 12 ft track and wow are they proud of the long extrusions!

I have used one like that for many years myself. Still thinking about a 75 track saw but my biggest obstacle is that I want at least a 12 ft track and wow are they proud of the long extrusions!

 

I have one like Tom's as well for really long items.  I also have a Festool (75) track saw with 8' of track.  You are correct, they are proud of those tracks!  They don't give the track connectors away either!  I can certainly wait for a killer sale before buying another track!

Festool killer sale? What a fantasy !

 

Hey, it's my fantasy, please don't kill it ;)

Personally I use an aluminum straight edge I found, works pretty good with a good blade in a circular saw.

I have used one like that for many years myself. Still thinking about a 75 track saw but my biggest obstacle is that I want at least a 12 ft track and wow are they proud of the long extrusions!

You can say that again.

I've seen your idea Tom and I've seen people use angle iron clamped to the surface though with the longer lengths, angle has a lot of flex in it.  Contractors are a bunch of innovative people who are notorious for coming up with solutions to problems - often inexpensive solutions.  With the work that YOU'RE doing, you probably have to be doubly innovative working with the Historic Homes.  Here in Georgetown SC (established 1734) we have a LOT of really old homes and there is a host of requirements and regulations that a historic homeowner has to comply with.  As you know, a repair to one of these is "nothing standard" where often, nothing is plumb or square.   
 

I have two similar to Tom's. My 8' version has been in my shop for over 20 years. This 4' version is not quite so old but still is used a lot, as you can see from the wear marks on the wood. It is put right on the marks you want to cut, and held in place with spring clamps. When there is no place to put the clamps, I just used a couple of small nails to hold it in place. For a special time when you need a really long one, it should be easy to laminate using smaller pieces to keep the guide straight. 

 

I looked at a track saw ad and price and start laughing. It can't be any more accurate than my $5 one…

post-14694-0-02010800-1384568792_thumb.j

post-14694-0-56866900-1384568858_thumb.j

  • Author

Tom, did you build that telescope in your avatar?  My best friend and I started building telescopes when we were twelve.  Mirrors sold then for the same number of dollars that they do now, so we ground the mirrors too.  The first house I built was a 12 x 12 with a roll off roof for a 12 1/2 inch f/6.  My friend went on to become an Astronomer, and is now one of the top in the world.  He was on a team that won the Nobel.  He carried our 12 1/2 into the NASA optics lab when they were having trouble with the HUBBLE, and was put on the team to fix it.  The 12 1/2 inch we built was several factors better than anything NASA had at the time.

 

I had the same reaction when I first saw a commercial track saw.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.