Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Curly maple from rough cut

Featured Replies

After my last trip to the mill, where I bought 150 brd feet of 8/4 rough cut maple, I found that 2 of the boards were beautiful curly maple.

 

I am surprised that the people there did not notice and make me pay premium price for these boards. So my question, is there actually a way to tell the board is going to be curly maple before it is planed?

 

Thanks,

--

PAB

 

 

 

Bring a little block plane and hit a board if you suspect one might be figured.  If a board is super dirty there's no way to tell, but usually you can spot them in the rough because there will be a lot of tearout...depending on how they were milled.  If they're straight off the saw then it's tough to tell.

Eric is spot on!  Just be sure to ask permission with the block plane, and try not to go nuts.  I have never had an issue, but it is one of those things where one bad apple can spoil the bunch.  Try not to make a mess, and if you do just pick it up.  I usually find planning 2"-3" on the quarter sawn face of the board will tell you all you need to know quickly.  

I also buy from a sawmill.  His normal boards are sold so rough sawn that I see no way to tell (other than planing) what the figure looks like, but somehow he also has a pile of figured boards at an upcharge which are planed to reveal the figure.  Maybe he can tell when it is freshly sawn, before it goes into the kiln, what the figure will be like?  I think some of that fuziness on rough sawn boards is an artifact of drying. 

 

For some species quarter sawing reveals more figure - such as ray fleck in oak or sycamore.  But in other species quartersawing gives you more of a ribbon effect.  You see this in exotics but I've also seen it in domestics like cherry, birch or walnut.  

  • Author

Thanks for your great responses. Block plane can work but will be tedious.

 

Here is attached a picture of the boards I bought before planing. Can you tell the ones that are figured?

post-7395-0-79896200-1386173219_thumb.jp

Its very easy to tell curly maple boards in a stack. Just look at the side of the board. You will see the figure or better put, its gnarley or wavy edges. 

 

Mostly, figured wood is considered a defect. Most folks want to build with the cleanest and straightest grain maple and will stick out like a sore thumb if curly is used with straight grain upon finishing. If you don't want the curly boards take them back?

 

-Ace-

Its very easy to tell curly maple boards in a stack. Just look at the side of the board. You will see the figure or better put, its gnarley or wavy edges. 

 

 

 

-Ace-

 This is how a pick curly boards out .  I can go through 100s of BF and pic heavy figured boards from lighter figure pretty quick .

Thanks for your great responses. Block plane can work but will be tedious.

 

Here is attached a picture of the boards I bought before planing. Can you tell the ones that are figured?

Are those 13 boards all of the 150 bd feet?

  • Author

Are those 13 boards all of the 150 bd feet?

 

Yes, doesn't look like 150bd feet to you? They are 8/4.

 

BTW I finished my workbench. Here is how it looks:

post-7395-0-21453000-1386788329_thumb.jp

PS: the bottom trestle is the curly maple board.

  • Author

Nice looking bench , how do you like the casters ?

Casters look tiny compared to the bench but so far they hold it. I help them by lifting the bench when they go down.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.