Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I need a coping sled

Featured Replies

I"ve been using just a slotted miter gauge to make all my copes on my doors kinda tricky I just read about an infinity coping sled it looks really nice they want 170 bucks for it I know alot of guys make em but maybe some things just better off buy whatta ya think

==> infinity coping sled

 

That thing is pretty nice...

 

I cobbled something out of 3/4 BB...  It's not sexy or adjustable -- just KISS...  Mine only accepts 3/4" stock in a single width and fits my miter slot to cutter head distance, so it's truly a one-trick pony...  It's got the same basic dimensions, shape, toggle clamps and anti-slip sandpaper of the Infinity, but none of the adjustments....

 

I don't vary the stock thickness or width of rails/stiles all that often so a KISS-jig is all that I need...

  • Author

I"ll see how much that kiss costs I dont really wanna drop 170 but it did look nice

  • Author

yea I must be tired I actually tried a search on google for a kiss coping sled LOL as soon as i pushed the enter button I knew someone needed to hand me my stupid sign LOL but I hear ya 40 bucks verses the 170 I'll spin one up for now thank u sir

I just keep some of these DeStaco clamps on hand, and cobble one together in a few minutes when I have a specific need. This one has a fitted Boxwood backup for window rails, stuck to the plywood with three small biscuits. I use both ends of this one. It just registers against the fence. On others, and my homemade router tops, I've made it to register on the outside of the top if I wasn't using a fence. I've rarely used a miter slot.

http://www.historic-house-restoration.com/images/sled_wall_007.JPG

  • Author

thanks guys I just orded four toggle clamps off amazon for 8 bucks each so the money I'm saving from buying a $170 coping sled I bought a $40 pin moisture meter I'll post some pics of the sled when I get it done

==> I just keep some of these DeStaco clamps on hand, and cobble one together in a few minutes when I have a specific need.

 

great minds and all that...

yea I must be tired I actually tried a search on google for a kiss coping sled LOL as soon as i pushed the enter button I knew someone needed to hand me my stupid sign LOL but I hear ya 40 bucks verses the 170 I'll spin one up for now thank u sir

Most of the money I save by not buying unnecessary woodworking tools is spent on other sorts of tools too. This company gets a lot of my money. They have a bunch of really good stonework videos that woodworkers would probably enjoy watching.

http://www.trowandholden.com/

I"ve been using just a slotted miter gauge to make all my copes on my doors kinda tricky I just read about an infinity coping sled it looks really nice they want 170 bucks for it I know alot of guys make em but maybe some things just better off buy whatta ya think

I've read a few of your post, it sounds as if you are doing this commercially. I would not cheap out the the shaper. Get a real good all metal coping device that will not warp and cause you grief. It may seem like your saving money now but your not. Your door production is likely a bottle neck and without good tools and tooling your going to have issues. If your using the proper larger cutters you do not want a sled to table interface for coping your doors. Your stock should be solid against the shaper table. If your going to cope by the piece and not gang the Martin Contermax is $160 and will produce the most vibration free repeatable cuts.

I would rather have the Weaver coping sled because when you accuate the clamp it also supplies air to the sled to table area so that it slides very easily. Kind of like a air hockey table.

 

I don't think they are worth that amount of money but the ones we use were bought at auction.

  • 2 weeks later...
  • Author

my toggle clamps finally showed up yesterday now I need to decide what style of sled I should build I hear guys saying one that rides the fence is good I keep thinking one that rides the miter slot would be better any ideas

my toggle clamps finally showed up yesterday now I need to decide what style of sled I should build I hear guys saying one that rides the fence is good I keep thinking one that rides the miter slot would be better any ideas

Depends on the sleds primary use. What type of cutters.

If you are coping something that already has a shoulder, as the one in my picture was for (pieces with long tenon going into a full mortise, instead of a short, coped tenon), using the fence simplifies establishing exact position when you clamp the piece into it.  If you are running the whole end of a piece in one pass, I don't know that it matters.  There are endless possibilities.  I've even used the edge of the table as a guide for some.  I'd just use one guide system, and not try to use, say, both the slot and the fence.

  • Author

allright I finally got my sled built and wow it works great a few eight dollar clamps and some poplar scrap and a peice of shop birch for the base as you can see I used the table on the shaper to ride the sled on I think that works great thanks for advice guys

  • Author

 

 

allright I finally got my sled built and wow it works great a few eight dollar clamps and some poplar scrap and a peice of shop birch for the base

 

get busy living or get busy dyin

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.