Recommended Posts

Posted

anyone have this?     my only reservation is that the guard exposes the blade after the board passes through. 

 

seems kind of gimmicky as well but I trust Jet innovations and seems like a great price for a 12" jointer.

 

If not this one what do you have and why do you like it?

Posted

anyone have this?     my only reservation is that the guard exposes the blade after the board passes through. 

 

seems kind of gimmicky as well but I trust Jet innovations and seems like a great price for a 12" jointer.

 

If not this one what do you have and why do you like it?

Its a euro style guard. Your not really getting a true 12" jointer. Its way to small and IMO is to short for any width jointer.

Posted

As PB says, the bed is really too short...

The Euro guard is a push... if you do a poll, you'll probably get 50/50 Euro to pork chop...

For the same $$, I'd look at a long bed 8". To get a decent 12", you really have to spend quite a bit more...

Posted

It depends what kind of work you do.  It's longer than my 6" jointer and I'd rather have more width than length.  I believe I would despise that guard though and it would end up being taken off.  I have other ways of flattening wider stuff though so it wouldn't be something I'd put that kind of money into.

Posted

i have a long bed delta 6" now   but its needs to be setup correctly...  unfortunately I'm a trial and error kind of guy..   try to learn as i go and pick up what i can online...   I'm looking at upgrading my planer and my jointer and considered this as an option that would work for both and save some space..  but i think I may be leaning towards a nice planer instead

Posted

==> It depends what kind of work you do.

 

You've got a point -- if you primarily build boxes and bandsaw your own veneer, then I could see it... But the bed is quite short for full-sized sticks...

 

In my mind, cutter-head width gets more important when you slice your own veneers --- otherwise, bed length is more important.

 

One thing though, you've got to watch the HP specs on many Asian-sourced 12" jointers... It takes quite a bit of power to hog-out 12" of Hard Maple. HP has become a bit of a marketing spec these days... You've got to be a bit careful...

Posted

Unfortunately jointers are a misunderstood machine. An 84" inch jointer is a small jointer as far as length goes and is about right for a cabinet maker with the majority of board lengths under 40". That doesn't mean you can't joint a longer board but there will will be more waste and wedging. 12" wide boards are usually expensive boards so if your jointing long expensive boards you don't want them in your dust collector. Unfortunately manufacturers don't make jointers in truly long beds in reasonable widths. 

There is no good answer when it comes to jointers. In order to keep your sawdust creation to a minimum and get the best results you end up buying a machine that dwarfs your materials. 

 

 

 

 

 

Posted

In order to keep your sawdust creation to a minimum and get the best results you end up buying a machine that dwarfs your materials. 

 

 

thats a great point i hadnt considered.    being a hobbyist, Im sure id be fine with the delta 6" i have but I wish i had someone nearby that could show me how to set it up properly.   my technique could probably use an overhaul too.     im learning though

Posted

Combination jointer/planer machines are not that popular here in North America. U.S. based woodworking machine companies never had them in their product line. But they are much more popular over in the U.K. and Europe.

 

If you spend any amount of time looking at a woodworking magazine from the U.K., or looking at a woodworking store based on that side of the pond, you’ll see a wide variety of combination jointer/planer machines available. For example, Axminster UK sells one jointer, and that’s a 6 inch model. They have nine different jointer/planer machines for sale, in 10”, 12”, and 16" sizes. Even Dewalt has a combination jointer/planer machine for sale in the U.K.

 

As far as bed length goes, with good technique, you should be able to face joint a board that is twice the length of your jointer bed without losing a huge amount of material. The 55” long bed on the Jet JJP-12 should give you the ability to face joint a board that is 110” long. I don’t know of many furniture projects that would require a board longer than that. If you’re making a bed, a king size mattress is 76” x 80”. A typical grandfather clock is about 85” tall or so.

 

I have a Rikon 10” jointer/planer combo, which has a 40” long bed. I’m able to joint boards up to 6 feet long without problems. I used the same machine to mill up 8 foot long beams to make my workbench. Even though these boards were longer than twice the bed length of my jointer, it was easy to do with either a helper or an outfeed stand.

 

The two great advantages to a combination jointer/planer machine are that it saves a lot of space, and it’s a way to get a wider jointer at a much more reasonable price than a single duty machine. I’ve often been very happy that I have a 10” wide jointer. I’ve never felt like I needed a longer bed, not even when milling the boards for my workbench top. For me, the only reason I would ever get rid of my 10” jointer/planer combo is to get a 12” or a 16” model. But then I would have to build a bigger shop.

 

And yes, you can come up with woodworking applications such as running molding that would be a lot nicer to do on a longer bed jointer. If you’re doing that sort of work, then the combination machine might not be right for you. But that completely depends on what kind of work you plan on doing.

  • 3 weeks later...
Posted

I considered the Jet combo machine but in the end I spent the extra and got the Hammer A3-31, same size as the jet.  It should arrive next week.  I had a PW 6" with helical cutter head, nice machine but was too narrow many times so I was often lusting after a wider jointer and my planer was a Riged lunch box machine which is the loudest thing I have ever experienced.  The Hammer will take the place of both and save me some precious garage space.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 54 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined