Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need some design help for a finish room

Featured Replies

I have the space in my basement for a dedicated finish room, and I need some help designing it. I thought I would frame out some 2x4 walls, and staple 6 mil poly over the studs. I will use a "zipper" door to save the swing of a traditional door. I can install a fresh air vent by using a piece of scrap ply with a hole and self closing vent cover (like a dryer exhaust vent, but installed backwards).

The issue I am having is how to exhaust the overspray. The only available window is a basement casement window, about 6 feet off the floor. It's larger than the standard windows, but not by much.

I thought about getting an old furnace blower, but I don't know how to hook it up to suit my needs. I also thought of using a powerful bathroom exhaust fan and running it out the window, but I don't think that moves enough air.

I will solely be spraying water born clear topcoats, made by general finishes.

Any ideas? I have been researching for a while in the Internet, but it am coming up empty handed. Most of what I see is the garage bay door open idea.

First it doest matter if your spraying solvent or WB you pull fresh air in and exhaust the contaminated out. Fan size is calculated by the air inlet size. If the opening of your booth is 6' wide by 8' tall you would need a 4800 cfm fan no matter if its solvent or WB.

  • Author

First it doest matter if your spraying solvent or WB you pull fresh air in and exhaust the contaminated out. Fan size is calculated by the air inlet size. If the opening of your booth is 6' wide by 8' tall you would need a 4800 cfm fan no matter if its solvent or WB.

Does the opening have to be that large? Can I shrink it to a smaller size so a smaller fan can be used?

Is there a calculator or spreadsheet or formula to use for various inlet sizes?

Does the opening have to be that large? Can I shrink it to a smaller size so a smaller fan can be used?

Is there a calculator or spreadsheet or formula to use for various inlet sizes?

:) opening should be a full wall of your booth no cheating.

If you shoot solvents, there are some considerations around electrics, motors, switches, etc. Most folks are going WB at this point, so it may not be an issue for you...

  • Author

Yes, I will be 100 percent waterborne. Here is an interesting article. If you have time, give it a read.

http://news.thefinishingstore.com/?p=1277

It's written by bill perry, a pretty respectable source.

Here is another article, but I am unsure where the indoor fan is supposed to blow to.

http://www.highlandwoodworking.com/library/spray_booth.pdf

Yes, I will be 100 percent waterborne. Here is an interesting article. If you have time, give it a read.

http://news.thefinishingstore.com/?p=1277

It's written by bill perry, a pretty respectable source.

 

What you don't want to do is put yourself in an enclosed booth make shift or not without enough air. Box fans do not move even close to enough air for an enclosed booth. Add filters and they hardly move any air at all. They are great in a big open garage to catch some overspray. Just dont box yourself in trying to contain the overspray unless you step up and buy the right fans. We dont need a dead pug.

  • Author

What you don't want to do is put yourself in an enclosed booth make shift or not without enough air. Box fans do not move even close to enough air for an enclosed booth. Add filters and they hardly move any air at all. They are great in a big open garage to catch some overspray. Just dont box yourself in trying to contain the overspray unless you step up and buy the right fans. We dont need a dead pug.

So I need a three sided booth with a powerful fan to exhaust the overspray and fumes. Is there a way I can accomplish this with my basement casement window, do your think?

A furnace fan has served me well. For at least a decade it was mounted to a window I made to accommodate it. It is now ducted through a joist bay. On the outside there's an 8" pipe that vents above the roof line. Neither setup is suitable for solvent based spraying.

post-13970-0-78237700-1386818292_thumb.jpost-13970-0-11828500-1386818316_thumb.j

I read something somewhere back about a guy who does painting for his model railroad, using an apartment and a spray booth he disassembles.  I do recall that he had two fans running for a knockdown spray booth barely the size of a Schwartz tool box.  Don't recall what size the fans were.

 

Don't skimp on the air draw.  It doesn't take much to prove inadequate.  (And then you're refinishing... everybody's favorite task.)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.