Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jointing curly maple

Featured Replies

I am making a pizza peel and using curly maple. I am having a hard time jointing the edge. I have a spiral head cutter jointer and stanley #4. I have tried both and still getting tearout. Any help would be great.

You shouldn't be getting tearout with your smoothing plane if it's sharp.  Sharpen it.

 

I'd still do what PB said and rip off 1/16" or so at the table saw to get rid of the deep tearout that happens on curly maple...then hit it with a couple passes with a SHARP #4 to get glass smooth.

 

I'm also surprised you're getting tearout with the spiral cutterhead.  Do your inserts need to be rotated?  Shelix is supposed to eliminate that problem.

I've seen some very highly figured hard maple that was tough to prevent tear-out...

 

Couple of things to try after PB's table-saw tip:

 

1. If you don't have a high-angle frog for your smoother, you can add a back-bevel to the iron. This raises the effective pitch and really helps with tear-out... David Charlesworth has a video on this -- think it's on his blog...

 

2. Chris Schwarz demonstrates a technique where he wets the edge with mineral spirits to soften the fibers, then uses his #4.

 

3. You say 'spiral' cutterhead... Spiral is not the same as helical. Helical reduces (and in most cases) eliminates tear-out... Spiral heads are a marketing gimmick...

 

4. As Eric says, how long since you rotated your inserts?

 

5. While not applicable to your situation (more for the next member with this problem), you can get jointer knives with a back-bevel. There maybe back-beveled helical inserts -- I've never looked into it...

 

Good luck...

I am making a pizza peel and using curly maple. I am having a hard time jointing the edge. I have a spiral head cutter jointer and stanley #4. I have tried both and still getting tearout. Any help would be great.

 

do you have a picture of your edges after they come off the jointer? 

If I couldn't get an edge with the table saw id climb cut it on the shaper. If you dont have a shaper you can do it on a router table. Spirals bit dont quite cut as well as a Shelix but it works fine as long as you limit your cut to about 1/64 to keep it on the safe side since you dont have a feeder.

I work with figured wood all the time. Get a spray bottle of water and dampen the woods edges. Run through the jointer (I have straight knives). Make sure your beds are waxed or the moisture could rust the beds. Dry the beds off when done with compressed air and the cutter head too. If you can skew your jointers fence, that helps too. 

 

Mineral spirits works, but I have a problem with mineral spirits wet wood in my dust collector...but that's just me.  :)

 

-Ace-

  • Author

I have steel city jointer with Helical head its newer. I am going to try router table first. Sounds like most people have good luck wetting it down. I am going to try a few different things on Saturday and let you guys know how it went. I think will sharpen the #4 also. 

 

Thanks for the tips guys.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.