Phenolic - MDF - Cast Iron Router Table Top ?


Recommended Posts

Posted

I live in Houston and the humidity is terrible year round. I want to get a router table but I have some concerns with MDF warping. Does pure phenolic warp as well? I would like to get a router table/stand/lift combo. I've looked at Jessem, Woodpecker, Kreg…etc. While their products seem nice I'm worried about the table warping and leading to crooked cuts. What are your opinions and have you had any experience with the above problem?

 

Thanks

 

Posted

I've made them out of 3/4 Birch plywood with Formica on top, have a cast iron table saw wing one, and made several out of solid phenolic bowling alley flooring.  All worked fine.  The ones I made out of bowling alley flooring are only about a foot square, so not exactly scientific proof that one won't warp.  The phenolic is my favorite though, and probably the only ones I'll use from now on, but because of design, rather than just material.

Posted

If cast iron was an option that would be my choice. I've never seen a table that didn't warp or sag a little over time. Just another reason I prefer shapers. My PM has the one of the biggest lifts made and it still hard to keep the top flat with minimal surrounding material.

Posted

I agree with PB...if money is no concern then cast iron is the obvious favorite.  I have MDF and it's fine.  The plate for your lift makes it almost moot...as long as it's ever so slightly proud of the rest of the table, it really doesn't matter.  Think of it like the wings on a table saw...as long as they're not higher than the main table, they're inconsequential...they're just there for support of larger pieces. 

Posted

Ah ... Houston ... I lived there when my first years back in the USA coming from Argentina. OK with that humidity ... Stainless Steel :)

I honestly find the humidity worse in Baltimore where I grew up than in Houston. When I moved from Baltimore to Houston in 1998 it was 104 degrees and you could cut the humidity with a knife and when we got to Houston it was 98 degrees but felt like I was in 70 degree a/c.

Posted

680,

I live in West Houston and I have the Jessem Phenolic top with the built in router lift for 8 years. It is set up in my garage. No issues and I would do it again.

 

JOHN 

Posted

I honestly find the humidity worse in Baltimore where I grew up than in Houston. When I moved from Baltimore to Houston in 1998 it was 104 degrees and you could cut the humidity with a knife and when we got to Houston it was 98 degrees but felt like I was in 70 degree a/c.

In Charm City can feel water condensing on your forehead in July and August...

The Yucatan doesn't even feel as bad in the summer.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 47 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined